Rixson 3252010

copy to clipboard

Rixson 3252010 Bottom Arm Package

enlarge
enlarge
× This image is for a similar product but it will differ in size, color and/or other attributes.
Rixson 3252010 Bottom Arm Package
More from Rixson
Price: $406.79 USD
Ships From
Comments (Optional)
For quantities beyond the "In Stock" above, the item(s) Made to order. Call for current lead time.

1-844-809-3667

Sales
Technical Support
Product Description:
Rixson Heavy-Duty floor closers parts
 
3252010 Bottom Arm Package

Introduction

Floor closers provide the best mechanical means of controlling a door. They are designed to work with the laws of physics to provide long-lasting performance and reliability.
The weight of the door is supported entirely by the bottom arm, which is directly connected to the floor closer spindle.
This hanging means provides several important mechanical advantages:
• Fasteners on the door and frame are in shear rather than tension (as with hinges) and are less likely to pull out over time. This creates less stress on the frame assembly, prevents door sagging and allows the door to swing with less resistance from friction.
• A door supported in this manner relies on the strength of the floor to carry the weight, not the frame. This allows extremely heavy doors to be hung in an opening and lets any weight door swing with more efficient geometry.Doors hung on floor closers also allow for vertical adjustment throughout the life of the building to compensate for settlement.
• The direct connection between the bottom arm and the floor closer spindle creates a tremendous increase in efficiency compared to surface closers with exposed arms.
A floor closer produces an 85% closing force to opening force ratio where surface closers are approximately 60% efficient. A floor closer is far superior in closing a door when weather conditions or building stack pressure are factors. Rixson® Floor Closers take this efficiency concept to an even higher level by utilizing helical torsion springs. In addition to these important mechanical and door control advantages, floor closers are fully concealed to maintain aesthetic design of the opening and to prevent vandalism or tampering by unauthorized individuals.

options

Selective Hold-Open (SHO)
Factory-installed on 27 & 28 Series closers. Hold-open may be turned on/off.
Automatic Hold-Open (AHO)
Available on certain series closers with or without dead stop. Preset at factory for specific degree of hold-open. Degree of hold-open cannot be changed, nor can closer be made into non hold-open.
Delayed Action (DA) Provided on barrier-free installations. Permits door to remain ajar (at 70°) for up to 30 seconds. Operates by separate valve and can be shut off if not needed.
Not available on closers furnished with cold weather fluid, and not recommended for exterior applications because of weather factors. (27 & 28 series only)
Physically Handicapped (PH)
To comply with guidelines established in the American With Disabilities Act, lighter opening forces are met if closers are ordered with a PH prefix. If 5 pounds of opening on interior doors is needed, simply order PH. If 8.5# of force is needed, specify Prefix PH and suffix 8.5#. Be advised that lower opening forces mean lower closer forces. PH products should not be ordered for exterior doors or fire rated openings. Fire/Lifesafety openings take precedence over the convenience of ADA. Securing a building is also a major concern and a lighter closer may not be strong enough to secure a latch bolt in a strike. Use care when specifying PH products.
Cold Weather Fluid (CWF)
Should be considered in installations where ground temperature is constantly below +15°F.May be used in temperatures as low as -35°F.
Sealed Closer (SC)
Used where water contact may occur. Provides gasketing and a cover plate that are epoxied around the case with the closer inside.Not available for replacement closers unless cement case is also replaced.
Fire Rated
(F) Used on labeled fire door requiring steel base pivot. PH with 3 pounds of opening force may not be used on fire doors.

features

• Floor closers are fully concealed to maintain aesthetic design of the opening.
• Full weight of door is borne by floor closer, providing trouble-free operation and long life.
• Doors up to 1,500 pounds are accommodated, allowing standard and heavy doors in a building to be hung by the same means.
• Available offset or center hung to accommodate any installation.
• Vertical adjustment provides for field adjustment of the door if required.
• Specification of heavy panels on the door face with standard offset floor closer preparation available.
• Full floor-to-ceiling concealment is offered for center hung doors, providing almost unlimited design flexibility.
• Extended spindles available to accommodate any floor condition.
• Offset models available 3/4" or 1-1/2" offset.
• Offset models available for lead-lined doors.
• Offset models available for fire door assemblies up to three hours.
• Spring tension and closing speed are field adjustable.
• Built-in fully adjustable hydraulic backcheck standard on 27 and 28.
• Available in all standard architectural finishes.



Questions and Answers
Q: I do need a template for Rixson 3252010 please
A: This arm is used in different closer applications - which closer are you using it with?
Q: Would you have a template for the door prep required for this arm
A: The way that I approach this type of paperwork request is to figure out which unit the arm is used in and then pull up the installation instructions or template for that unit.

The Rixson 3252010 Bottom Arm Package is listed in the price list as being included with the F327 & F53 & F5310.

The template for the F5310 can be seen here:

Download File

(Required, used to email you once question is answered.)
Customers who bought this item also bought:
Dorbin 16AB 16 BN Concealed Interlocking Weatherstrip, 3/8" Flange, 16" Length, Bronze, with Copper Nails
Dorbin 16AB 16 BN
Concealed interlocking weatherstrip equipment for wood applications, bronze, 3/8" flange, 16" length, mounting nails are included
Dorbin
Price: $38.89
Rixson 128-3/4 Pivot Set
Rixson 128-3/4
Rixson's 128-3/4 Center Hung Pivot Set for Doors up to 250 lbs.
Rixson
Price: $281.98
Rixson 117 3/4" Offset Pivot Set
Rixson 117
Rixson's 117 3/4" Offset Hung Standard Pivot Set for Doors up to 300 lbs.
Rixson
Price: $524.03
Rixson 147 3/4" Offset Pivot Set
Rixson 147
Rixson's 147 3/4" Offset Standard Pivot Set for Doors up to 600 lbs.
Rixson
Price: $559.66
Rixson 176 626 Light Duty Center Hung Pivot Set Satin Chrome
Rixson 176 626
Rixson's 176 Center Hung Pivot Set for Doors up to 150 lbs.
Rixson
Price: $343.00
  • Watch Expert Advice on YouTube
  • Corporate Members of DHI
  • Member of NFPA.
  • Follow us on Facebook
  • AAADM Certified!
  • ALOA Certified!
  • Follow us on Twitter
  • DHI FDAI EDA Inspector
  • AIA
  • Follow us on Pinterest
  • ARL
  • Intertek Logo