No Description Available

No Description Available

It is a 6 amp notification power expander that provides its own AC power connection, battery charging circuit, and backup battery for use with Silent Knight addressable fire alarm control panels.

The 5815XL is a signaling line circuit controller that allows you to add 99 SK modules and 99 SK detectors or 127 SD addressable detectors.

Gives you the ability to print on-site reports from your IntelliKnight® system and to interface with other systems, such as building control software.

The 5860 is a 4 x 20 LCD remote annunciator used with Silent Knight addressable fire alarm control panels.

The 5860R is a 4 x 20 LCD remote annunciator used with Silent Knight addressable fire alarm control panels.

The 5880 provides you with 40 programmable LED outputs to customize your remote graphical annunciator.

The 5895XL intelligent power module is a 6 amp notification power expander that provides its own AC power connection, battery charging circuit, and backup battery.

The SK2 is a two zone conventional fire alarm control panel (FACP) that bring the latest in microprocessor technology to conventional fire controls.

The SK4 is a four zone conventional fire alarm control panel (FACP) that bring the latest in microprocessor technology to conventional fire controls.

The SK5217 provides the SK5208 with 10 additional Class B (style B) zones. The SK5217 can be installed in the SK5208 control cabinet or remotely in a SK2190 accessory cabinet.

The SKACCLIMATE Multi-criteria photoelectric smoke detector incorporates both thermal and photoelectric technologies that interact to maximize detection.

The SKBEAM addressable beam smoke detector uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain.

The SKBEAM addressable beam smoke detector uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain.

Addressable notification module, provides supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns and strobes.

The SKCONTROL6 is a six circuit addressable notification module and provides supervised monitoring of wiring to the load devices that require an external power supply.

The SKDUCT addressable duct smoke detector is used for detecting smoke and products of combustion present in air moving through HVAC air handling systems.

The SKE450 Voice Evacuation system provides 50 watts of output power.

The SKF485C is a module used in pairs to convert the Silent Knight IntelliKnight SBUS from wire to fiber and back again.

The SKFFT with keypad, provides indications of phone activation, and corresponding trouble conditions.

The SKFIRECO is an addressable combination fire and CO detector that can detect and send separate signals for fire and CO.

The SKHEAT is a fixed temperature sensor that uses a thermistor sensing circuit to product a 135⁰F fixed temperature alarm.

The SKHEATHT is a variable high temperature detector that provides high temperature detection at 135⁰F - 190⁰F.

The SKHEATROR is a rate-of-rise temperature sensor with 135⁰ fixed temperature alarm.

The SKIP2 IP communicator is UL 864 listed for signaling under Other Transmission Technologies and comply with NFPA 72 requirements.

The SKIP2UD IP communicator is UL 864 listed for signaling under Other Transmission Technologies and comply with NFPA 72 requirements.

The SKISO is a line isolation module that acts as an automatic switch that opens when the line voltage on the signaling line circuit (SLC) loop drops below four volts.

The SKMINIMON is an addressable mini-monitor module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations.

The SKMON10 is a 10 pt addressable monitor module with ten initiating circuits that act as an interface to dry contact devices such as waterflow switches and conventional pull stations.

The SKMONITOR is an addressable monitor module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations.

The SKMONITOR2 is an addressable monitor module with two initiating circuits that act as an interface to dry contact devices such as waterflow switches and conventional pull stations.

Compatible with Silent Knight® IntelliKnight® addressable fire control panels v10.xx or newer.

Compatible with Silent Knight® IntelliKnight® addressable fire control panels v10.xx or newer.

10.0 A, 120 VAC PS Series remote charger power supply in a lockable, metal enclosure, red

6.0 A, 120 VAC PS Series remote charger power supply in a lockable, metal enclosure, red

The SKPULLDA is a dual action pull station requiring two motions to activate the station.

The SKPULLSA is a single action pull station requiring only one motions to activate the station.

The SK-RELAY is an addressable relay module that allows an IntelliKnight fire alarm control to switch discrete contacts by code command.

The SK-RELAY-6 has six Form C relays. It allows an IntelliKnight fire alarm control to switch discrete contacts by code command.

The SKRELAYMON2 combines two relay outputs and two monitor inputs into one module device.

The SKZONE is an addressable zone module that allows an IntelliKnight fire alarm controls to interface and monitor two-wire conventional smoke detectors.

The SKZONE6 is addressable six circuit zone module that allows an IntelliKnight fire alarm controls to interface and monitor two-wire conventional smoke detectors.

No Description Available