Q: How can I get these keyed alike?
A: Ordering these locksets keyed-alike would be no problem.
We simply need to add to the order of the line items required to pick up the additional labor and material.
Here is what I mean:
For every soldier that we're going to rekey you will have to order a quantity of "
Labor Code to key alike cylinder" as seen here:
Click Here
The for every additional cut key you require you would order one of the "Cut Key Charge" as seen here:
Click Here
Here is an example: If you wanted to order two locks where the cylinders to be keyed alike with a total of 7 keys, you would order a quantity one of the "labor code to key lock cylinder", and then a total of 5 of the "cut key charge".
The logic behind this is that we are only keying one cylinder to the other cylinder and the original cylinder will already come with 2 Keys therefore we only need to sell you an additional 5 keys to make up the total number of 7 keys required.
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with. If this answer was helpful -
please consider following us on Twitter
Click Here
or liking our page on Facebook
Click Here
Q: Installing on a regular garage rail. Where does the lock hit the striker? Do I need to modify the rail?
A: Are you looking for a door lock that operates in the bottom rail as seen in the video here:
Click Here
Q: I watched the video in a dead bolt lock and I have a question. I bought an ultra hardware 44835 from Ebay and the locking mechanism doesn't lock or unlock using the key.....is there a way to fix it? Thanks
A: You will need to communicate to the manufacturer regarding this requirement for technical support yes we do not support material bought outside of our sales channel.
Q: What is the length of the tailpiece on this item?
A: It measures 2 inches.
Thank you!
Q: What hole size would we drill for the locks?
A: I would personally drill a 1-1/4” diameter hole through the door for the rim cylinder. Having said that, since there are no installation instructions included with the unit by all means confirm that prior to drilling.
Q: what type of side door slide lock do i use
A: The lock cylinder required for the Ultra Hardware 44835 Garage Door Lock is a rim cylinder in this hardware is included when you purchase the entire garage door lock.