Q: Hello, would you ship these to the UK, and what would you charge? Speed is not essential. Thanks
A: I can certainly ship to you in the UK. I have emailed you the shipping charge for this
Please contact our sales department here:
Click Here
if we can assist you with entering this order and please let us know if there is anything else we can help with.
Q: Does Irwin have Jaws 3/4" tall x 6" length x 1/4" thick with holes at 3" centers.
A: Irwin doe snot have jaws that match these requirements. The dimensions of the T6D can be reviewed here:
View Video
Is there a follow up question that we can perhaps attempt to answer? We take pride in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.
Q: what i sthe hole spacing on the 6 nch replacemnt jaws"...I need 4 1/4" speceing
A: 6" length
1" height
1/2" thick
4" Center To Center
.530" side hole diameter
.260" depth for bolt head
.333" backside hole diameter
Is there a follow up question that we can perhaps attempt to answer? We take pride deep in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.
Q: Hi, I need two vice jaws 3 inches long. The screw holes are 2 inches apart and 1/2 inch from each end. Let me know if you have some like this. Thanks a lot.
A: Please see this link to the 3" jaw plates
Click Here This 3" jaw plate has an 1-1/2" CTC on screw holes and .312" from one end of the jaw plate to the center of the screw hole. Is there a follow-up question we can assist with?
Q: Can you please confirm the size of thw screws which come with this product including the pitch
A: The manufacturer was able to tell me
The thread type for those screws is Metric.
but what I asked them to clarify the thread size they replied
Unfortunately, the thread size for the screws is not information we have access to. Please feel free to contact with any questions or concerns.
I must admit that it's unbelievable to me that Irwin / Stanley - Bblack & Decker does not know the thread type of a screw for a product that is required to install the vice jaws.
Q: My Record 6 inch Vise has different screw hole placemment on one side, the outside jaw plate screw holes are 3 3/4 inches Ctr to Ctr. Can I order jaw places with those screw hole dimensions?
A: No - not that we are aware of. The only screw hole locations for the replacement job plates are indeed those seen on the link back to this item.