Q: What loading strength is this in pounds per square foot
A: 12,000 lbs. over 8 ½” by 20” area.
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.
Q: Is this available in stainless steel?
A: Yes. We can build the unit in Stainless steel.
Please advise and if you want to move forward provide quanity(s) and zip code to where unit will be shipped.
Q: Yes, please quote 2 units made from 316 stainless steel, the opening where this would go is approximately 53” x 50”.
A: The quote that you have requested has been sent over to you.
And a summary of the outline of the compatible unit that you have requested is as follows:
2 - JD-SS-H20 BILCO FLOOR/VAULT/SIDEWALK DOOR
3'10.50 X 3' 3.50 (1180mm X 1005mm)
HINGED ON 3' 3.50 (1005mm) SIDE
1/4" (6.35mm) DIAMOND PATTERN DBL COVE
DRAINAGE FRAME W/ DRAIN COUPLING
H-20 WHEEL LOAD (OFF-STREET LOCATIONS)
STAINLESS STEEL SLAM LOCK
316 STAINLESS STEEL COVER & FRAME
316 STAINLESS STEEL HARDWARE
HINGED ON THE 3'3.5" SIDE.
MANUFACTURED WITH TYPE 316 STAINLESS STEEL, 1/4" DIAMOND PLATE COVER, 1/4" SMOOTH PLATE FRAME, TYPE 316 STAINLESS STEEL HARDWARE, BEAD BLAST AND CITRIC ACID PASSIVATED FINISH. TO SIT FLUSH IN AN EXISTING OPENING OF 4'5" X 4'2". REINFORCED FOR H-20 LOADING.
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise (something Amazon can not provide) as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with. If this answer was helpful -
please consider following us on Twitter
Click Here
or liking our page on Facebook
Click Here
Thank you for your consideration.
Q: Hello, My company is looking to purchase 3 of the JD-AL aluminum products listed in the subject and I have included the plan sheet for our project here:
Download File
in hopes that you could help me determine which two sizes we need which are:
2 at 99” x 88”
1 at 79” x 54”
We have two that will use 36” rcp, and one that will use 16” rcp for the vaults, which will determine the size of our JD-AL H20 product to use. Could you quote use for the three grates, as well freight to Culver City, California.
A: From the manufacturer:
We do not have anything that size and they would have to be a Bilco product.
Do we investigate smaller sizes?