Home > Bathroom Hardware > Grab Bars > Straight > 1-1/2" Diameter > Concealed Mounting > Snap Flange > Non-Peened Grip > ASI 3801-18-41

ASI 3801-18-41

Name: ASI 3801-18-41 18" Straight Grab Bar with Snap Flanges - Matte Black Powder Coated
Brand: ASI
SKU: ASI 3801-18-41
Price: 36.60 USD

ASI 3801-18-41 18" Straight Grab Bar with Snap Flanges - Matte Black Powder Coated

× This image is for a similar product but it will differ in size, color and/or other attributes.

ASI 3801-18-41 18" Straight Grab Bar with Snap Flanges - Matte Black Powder Coated

Price: $36.60 USD

Comments (Optional)

ADD TO CART

In Stock (Minimums Apply):

Yonkers, NY Warehouse Qty: 1389

For quantities beyond the "In Stock" above, the item(s) ships in 1 business day with $82.50 minimum purchase of ASI products or 2-3 business days for smaller orders.

+ Add to My Wish List

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

ASI 3801-18-41 18" Straight Grab Bar with Snap Flanges - Matte Black Powder Coated

ASI’s Matte Black Collection provides a chic alternative for modern washrooms. Carefully curated to be versatile and powder coated for added durability, these accessories are ready to make a statement in any setting. The boldness of black creates an air of sophistication, while the subtlety of the matte finish exudes warmth.
Features include cover that snaps over mounting flange dimples to conceal screws and concealed mounting flange of 3-1/8" (79 mm) O.D. diameter with 2 screw holes and 3 locking dimples; 1/8" (3 mm) thick, type 304 stainless steel.
Cover is type 304 stainless steel with a matte black powder coated finish and 22 gauge, 33/16" (81 mm) diameter.
1-1/2" Dia [Ø38] Grab bar with Snap-On Flange Covers
Snap Flange 1-1⁄2" OD (38 mm) Smooth - Straight Grab Bar, 18” (457 mm)
Matte Black Powder Coated

Cut Sheet

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Use grab bar as template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.

Optional Mounting Kits

3901 Dry Wall Anchors
- #12 x 2-1/23 long self tapping phillips pan head screws
3930 Concrete or Masonry Wall Anchors
- 1/4 -20 x 2" long machine screws with matching lead expansion-shields
3931 Dry Wall Anchors with Toggles
- 1/4-20 x 2" long machine screws with matching toggles
3932 1/2" Thick Metal Partion Anchors
- 3" (76mm) dia. plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded-onto concealed side
3933 3/4" - 1" Thick Metal Partion Anchors
- 3" (76mm) diameter plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded onto concealed side
3934 Back to Back Mounting on 1/2" Thick Metal Partition Anchors
- For back to back mounting on 1/2" thick metal partitions
- 1/4-20 x 1-1/4" long machine screws with corresponding hex nuts and washers