Home > Trim & Auxiliary > Flood Barriers > Doors > 20" height > 36" length > Inside Mount > Zero 2070A-20-IM 36

Zero 2070A-20-IM 36

copy to clipboard

Zero 2070A-20-IM 36" 36"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount

enlarge
enlarge
× This image is for a similar product but it will differ in size, color and/or other attributes.
Zero 2070A-20-IM 36" 36"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Main ImageVideo Review Zero 2070A Flood Barrier Shield with Channels for Doors - Inside Mount
More from Zero International
Price: $645.32 USD
Ships From
Comments (Optional)
ADD TO CART
This item is not in stock and typically ships in 25 business days for any quantity beyond the above listed "in stock ready for shipment" quantity.
+ Add to My Wish List

1-773-809-3667

Sales
sales@absupply.net
Technical Support
tech@absupply.net
Product Description:
Zero 2070A-20-IM 36" 36"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
  • Flood Barrier Shield with Channels for Doors
  • Inside Mount
  • Length: 36"
  • Height: 20"
  • Thickness: 1/4"
  • Material: Aluminum
  • The two vertical tracks with rubber seals and all the knobs come with the shield
  • A door saddle is optional, depending upon the floor surface
  • For door openings over 4 ft it is recommended to use a post(s) in the center of the shield. These posts help minimize the hydrostatic deflection experienced on a wide plate.
  • These post, part number 22070-IS (inner sleeve) and 22070-OS (outer sleeve), can be purchased separately
  • This removable barrier shield answers pleas from builders for help in protecting doors and building contents from water ingress in flood-prone areas
  • The shields are not designed to seal 100%, the idea is to stop excessive water flow into the house or garage and to prevent water damage
  • The lightweight aluminum shield requires no tools or muscle strength for insertion into premounted vertical channels attached to either the door frame or adjacent walls
  • The shields are made of a marine grade aluminum to prevent rust. This is the same aluminum they use in submarines.
  • Additional shield sections can be stacked if greater height is needed. Use “H” bracket for stackable option.
  • The unit complies with guidelines of the Federal Emergency Management Agency (FEMA) and Federal Insurance Administration (FIA) for use on doors in flood-prone areas
  • The key to the shield's impermeability is the use of closed cell sponge (CCS) neoprene rubber engineered by Zero to ensure a water-tight seal. The rubber lines the aluminum channel brackets and the bottom of the shield. The neoprene also compensates for gaps at the threshold.
  • Standard heights are 10", 20", 24", 30", 36" and 42". Custom sizes are available upon request. Please contact sales for more information.
  • Zero International has a warranty and guarantee for three years. If the shield is stored inside you have should have limited problems with the neoprene. The neoprene in the brackets however should be replaced when they are damaged. This can clearly vary based on temperature climate, weather damage in some areas may be worse than others.
Application


Technical Data
Installation


The commercial Flood Barrier Shield installation shown below is for a 12-feet wide, high-traffic opening with an overhead door and no existing threshold:


NOTE: Imperfect site conditions and large size of some commercial door openings require more site preparation than is for typical residential Flood Barrier Shield installations. To prevent possible deflection of the barrier shield under excessive hydrostatic pressure, a center support (removable when barrier shield is not needed) should be used for openings larger than five feet, as shown here.
The center support used in this installation consists of two sleeves: inner tubing (#22070-IS) and outer tubing (#22070-OS) that can be purchased separately, see above.
Video Review of Zero 2070A Flood Barrier Shield with Channels for Doors - Inside MountVideo Detail Page
Questions and Answers
Q: The door I want to protect has an inside measurement of 35 inches. I don't know whether to order the 34 or 34, or do I need a custom barrier?
A: Are you saying the actual door width is 35"?

See the sketch here for assistance as well:

Click Here

Please advise as we will be sure to order you the correct unit.

Q: The door is 36 inches, but where the barrier is to be installed is 35 inches. My question should have been whether a 34 or 36 inch barrier should be ordered. Thanks again and hope this is clearer.
A: Thank you for the follow up question. The order size in your case will be this item:

Click Here

However for your size, and per the ordering instructions here:

Click Here

You will want to order the item as a 35" width. You simply do so by indicating in the comment field on the order page the 35" width so it looks like this:

Comments:
Ship this at a width of 35"

This will allow you the ability to order it online and correctly.

Please let us know if there is anything else we can help with.

(Required, used to email you once question is answered.)
Customers who bought this item also bought:
Zero 2070A-20-IM 36" 36"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Zero 2070A-20-IM 36
Zero 2070A-20-IM 36" 36"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Flood Barrier Shield with Channels for Doors, Height: 20", Length: 36", Thickness: 1/4", Material: Aluminum, Helps Safeguard Building Contents, Inside Mount
Zero International
Price: $645.32
More Info
Zero 2070A-20-IM 40" 40"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Zero 2070A-20-IM 40
Zero 2070A-20-IM 40" 40"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Flood Barrier Shield with Channels for Doors, Height: 20", Length: 40", Thickness: 1/4", Material: Aluminum, Helps Safeguard Building Contents, Inside Mount
Zero International
Price: $860.44
More Info
Zero 2070A-20-IM 30" 30"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Zero 2070A-20-IM 30
Zero 2070A-20-IM 30" 30"L x 20"H Flood Barrier Shield with Channels for Doors - Inside Mount
Flood Barrier Shield with Channels for Doors, Height: 20", Length: 30", Thickness: 1/4", Material: Aluminum, Helps Safeguard Building Contents, Inside Mount
Zero International
Price: $645.32
More Info
  • Watch Expert Advice on YouTube
  • Corporate Members of DHI
  • Member of NFPA.
  • Follow us on Facebook
  • AAADM Certified!
  • ALOA Certified!
  • Follow us on Twitter
  • DHI FDAI EDA Inspector
  • AIA
  • Follow us on Pinterest
  • ARL
  • Intertek Logo