Q: do u have half-saddle type as well
A: Pemko does not offer a half saddle in a 5/" wide x 1/4" rise but I can offer this suggestion:
https://absupply.net/Dorbin-485A-36-Mill-Finish-Aluminum-Butt-Type-Saddle.aspx
Please let us know if there is anything else we can help with.
Q: what is a 271A MSES10SS?
A: The 271A of course is the threshold itself but then the MSES10SS are #10 Stainless Steel Machine Screws & Expansion Shields which is an add to the overall cost.
If you need to add the stainless steel machine screws and expansion Shields to your order feel free to reach out to us directly and we will add the item at that time.
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise (something Amazon can not provide) as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with. If this answer was helpful -
please consider following us on Twitter
Click Here
or liking our page on Facebook
Click Here
Thank you for your consideration.
Q: What does the FHSL14 mean?
A: The FHSL14 are 1/4X20X2 FLAT HEAD SLEEVE ANCHORS which is an add to the overall cost.
If you need to add the stainless steel machine screws and expansion Shields to your order feel free to reach out to us directly and we will add the item at that time.
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise (something Amazon can not provide) as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with. If this answer was helpful -
please consider following us on Twitter
Click Here
or liking our page on Facebook
Click Here
Thank you for your consideration.
Q: What does LAR mean after the 271A
A: The acronym “LAR” means “Length as Required” which is typically referred to when selecting a custom “bolt” for the threshold which is to say when specifying LAR it means send as many “bolts” (such as a 10/32 lead anchor and machine bolt) as required by the length of the unit (threshold, sweep, etc).