Q: 1) Would like to know if I can obtain the Pemko 18041_SB Brush Gasketing WITHOUT the mounting holes.
2) Would like to know if I can obtain the Pemko 18041_SB Brush Gasketing in a PAINTED WHITE (PW) finish. *
3) Would like to know if I can obtain the Pemko 18041_SB Brush Gasketing WITH WHITE soft brush. **
I would like to attach the Pemko 18041_SB Brush Gasketing with a 3M Double-Sided tape instead of screw fasteners. The standard mounting holes will detract from the appearance. The application is for sealing the perimeter of a 84" x 42" sliding elevator door opening (horizontal top and vertical sides). There is a 3/8" gap between the sliding elevator doors and the stationary 18" deep frame opening to the elevator. The Brush Gasketing is being added to cut down on the draft air coming from the elevator shaft; primarily as the elevator travels. There is cold or hot humid unconditioned air in the elevator shaft that gets "pumped" through the 3/8" gap as the elevator travels. Noise and aromas from other floors tend to travel the elevator shaft through the 3/8" gap as well. I will need 2X 84" + 1X 42" OR 5X 42" strips of the Pemko 18041_SB Brush Gasketing. * If the PW (Painted White) finish is unavailable, the C (Clear Anodized) finish would be acceptable. I can cover it with a white vinyl tape or paint it myself. ** If the white soft brush is unavailable, the standard light gray soft brush that comes with the C finish will be acceptable. As a future repair item, do you sell replacement soft brush strip material to replace the brush after it wears or becomes soiled? If the installation works well and is acceptable to the home owners, I may have as many as 35 additional elevator doors that can use the same treatment. You are welcome to suggest alternatives. Best Regards, Sims
A: 1) yes - we can indeed send them out as no holes
the 18041 is available only in C = Clear
D = Dark Bronze
G = Gold
SN = Satin Nickle
3) no - gray and black pile only.
This item having failed your requirements above, Is there a follow up question that we can perhaps attempt to answer? We take pride in our technical expertise so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.
Q: Thank you for the quick response. I am going out-of-town on business and don't expect to return until 10/24/14. I do have one more option that I have been considering, but I like your offer for now. I plan to contact you with an on-line order when I return. Presumably, I just put "WITHOUT mounting holes" and the exact individual lengths in the comment section for Pemko P/N 18041CSB (Clear anodized aluminum with a Gray Pile soft brush). Do you do 45-degree miter cuts for two (topside) 90-degree inside corners? 83-7/8"H x 41-15/16"W x 83-7/8"H (+0/-1/16" on width) and (+0/-1/4" on height). The cut is parallel to the bristles of the brush with the bristles pointing toward the horizontal sliding elevator doors. What is the typical delivery lead-time once an order is placed? Is there a 0.50"-0.75" wide semi-permanent, double-side tape (preferably 3M brand) that you recommend; and do you sell it by the individual roll? I may first try the 3M Scotch Brand double-sided tape that can be purchased at any office supply store. The surface for attachment is flat steel with a baked-on white paint. Best Regards, Sims
A: 1) understood and thank you
2) correct on mentioning the custom net length
3) we cannot do the mitered corners
4) 2 - 3 weeks to ship
5) I do not have a tape suggestion, but 3M is superior to all others in my opinion.
Is there a follow up question that we can perhaps attempt to answer? We take pride in our technical expertise so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.