Norton 6910 RF1

• Spring buffered stop assembly in slide track
• 85° to 110° templated door openings in 5° increments
• 1/8" (3mm) maximum frame reveal
• Adjustable Size 1-6
• Left or right hand
• Drop plate for low ceiling applications
• Push-side or pull-side applications
• Power Assist selector switch
• Push and Go selector switch
• Open/close obstruction detection
• Motor startup delay adjustment
• Vestibule function delay adjustment (For sequencing two or more units)
• Door hold open delay adjustment
• Single Pole Double Throw (SPDT) relay output
• SPDT relay output time adjustment
• SPDT alarm output
• Blow open function for smoke ventilation
• Infinite hold open function
• Presence detector input
• 24 VDC @ .5A output
• Selector mode switch (3 position)
  - OFF – Disables signal inputs except blow open. Unit still powered
  - ON – Activates signal inputs for normal use
  - HOLD OPEN – Activates the unit to the hold open position indefinitely

Template

• Meets requirements for UL10C and UBC 7.2 for positive pressure
• 2-year warranty (refer to current price list, terms and conditions)
• Americans with Disabilities Act (ADA)
• ANSI/BHMA A156.19 certified
• UL Listing: Listed for use on fire and smoke barrier door assemblies when the 120VAC (60Hz) power input is supplied through the normally closed alarm contacts of a compatible U.L. listed alarm system or alarm panel
• C-UL US listed for use on fire and smoke barrier doors
• California State Fire Marshal: 3550-944:109

• Power input 120 VAC, 60 Hz (+10%, -15%)
• Current draw 1.5A
• Auxiliary output 24 VDC @ .5A
• SPDT relay output for controlling electric strikes or electric locks not to exceed 1 amp @ 30 VDC