Linear LS2C26DCR

The full featured LS-2 series locksets provide large system features for an at-the-door solution. The LS2 series locksets are a perfect choice to manage door access that may otherwise not be available through traditional hardwired access systems. The LS-2 series locksets use an ANSI Grade-1 lockset and the powerful management capabilities of the Hub Manager® Professional software.

Model: LS2
Lock Type: Cylindrical Lockset
Finish Type: Brushed Chrome
Lever Type: Crescent Lever
Cylinder Type: Schlage C (standard)

Features:

• 2,000 individual users per lockset
• 2,000 transactions stored per lockset
• Managed with Hub Manager® Professional Software version 7.4.9 or higher
• Unlimited Access Levels including Time Zones and Holidays
• 20,000 users per system
• Unlimited Sites
• Import user names

Compliance

• ANSI 156.2, Series 4000 Grade 1
• Federal Handicap and ANSI A117.1 Accessibility Code
• Federal FF-H-106C
• California: (Formerly Title 19, State Fire Marshall)

Environmental

• Electronics sealed in conformal coating process
• Through door wire raceway reduces wire exposure to moisture
• Neoprene gasket seals exterior housing
• -20F to 120F, up to 98% humidity (non-condensing)

Electrical

• Power: 4 AA alkaline batteries
• Cycles: Up to 90,000

Lock Type: Cylindrical

This lockset easily retrofits into an ANSI 151.8 prepped door and requires only one additional 1” hole for installation. • Lock Body: Grade 1 Cylindrical Lockset w/ clutch mechanism

• Latch: Grade 2, 3 hour fire rating reversible with 1/2” throw, 2 3/4” backset
• Strike Plate - 2 3/4” "T" strike
• Door Thickness: 1 5/8” to 1 7/8”. 1 3/8” with optional spacer kit
• Cylinder: Solid Brass Schlage “C” keyway, 6 pin, with (2) nickel silver keys
• Optional Cylinders: I/C Core Prep Lever to accept OEM cylinders (see configuration guide for details)

Finishes

Lever Choices

Cylinders and Keying

The standard cylinder is a solid brass Schlage "C" keyway installed in the lockset body or handle.

For field installation of commonly available OEM lock cylinders, Cylindrical locksets can be ordered with an I/C core prep lever (lockset lever machined to accept a specific OEM cylinder, no cylinder is included in the lockset lever).

Mortise, Exit, and Deadbolt locksets can only be ordered with the standard Schlage "C" keyway or with no cylinder in the lockset body.

Specifications:

General

• Backset: 2 3/4” Standard
• Strike: 4 7/8” ASA Strike
• Door Thickness: 1 5/8” to 1 7/8”
• Handing: Field reversible, left or right hand

LS Series Dimensions