- Sliding door fitting
- Model: 80L
- Version: Track buffer with retaining spring
- Running gear version: Running gear with axle bearing
- Without soft and self closing mechanism
- Adjustment facility: Height adjustment: ±4 mm (5/32")
- For door material: Glass
- For door weight: = 80 kg (176 lbs.)
- For door width: = 500 mm (19-11/16")
- For glass thickness with tempered safety glass: 8 mm (5/16"), 10 mm (13/32"), 12.7 mm (1/2")
- For glass thickness with laminated glass: 8 mm (5/16"), 8.7 mm (11/32"), 10 mm (13/32"), 10.7 mm (27/64")
- Note on door thickness:
- For tempered safety glass: 3/8" and 1/2"
- For laminated glass: 11/32" and 7/16"
- Number of doors: 1
- Number of doors per system max.: 1 to 2
- Controller installation options: Ceiling installation, wall mounting
- Running position: Top
- Installation reference: No end cap is available for ceiling installation with fascia on both sides. A pair of end caps can be attached end to end and glued vertically in the centre of the running track (optional).
- Soft and self closing mechanism:
- Low opening force - easy and convenient operation
- Tested with increased closing speed up to 0.5 m/s
- Can be retrofitted or replaced at any time
- Accessibility: Opening force with door weight 50 kg: 18 N / 80 kg: 21 N
- Shock absorber:
- Closing speed with shock absorber tested up to 0.4 m/s
- Supplied with:
- 2 Running gears
- 1 Clear threshold floor guide
- 2 Track buffers with retaining spring
- Order reference:
- Please order glass clamp shoe, tracks, panels and accessories separately.
- Order 2 sets for 2-leaf sliding doors.
- Additional information:
- Please note when using shock absorber with retaining spring: The door may not close completely if the closing speed is too low, if it is too high, the door may bounce back slightly.
- For sets without or with soft and self closing mechanism on one side: If required, soft and self closing mechanism or shock absorber can be retrofitted.
- Packing & Sold as: Set.
- Note: Unit of measure is Set. When you buy a quantity of 1 you will get one set. Price is for one set.
Required products: - Mounting Rail, High, Pre-drilled, 8 mm (5/16") Width
- Mounting Rail, High, Pre-drilled, 19 mm (3/4") Width
- Single Running Track, Pre-drilled, W x H: 31 x 33 mm (1-7/32" x 1-5/16")
- Single Running Track, Pre-drilled, W x H: 47.5 x 47 mm (1-7/8" x 1-27/32"): 940.43.930
- Double Running Track, Pre-drilled, W x H: 70 x 33 mm (2-3/4" x 1-5/16")
- Mounting Rail, Pre-drilled, 19 mm (3/4") Width
- Glass Clamp Shoe Set, Slido D-Line11 80L/120L
- Mounting Rail, Pre-drilled, 8 mm (5/16") Width
- Single Upper Track, Wall Mounted
|