For interior and exterior applicationsSeals joints, repairs cracks and fills gapsPaintable with a water based latex paint after application*Provides a water-resistant sealTools easily and cleans up with waterComplies with the following requirements:ASTM C834 Type OP Grade -18°CASTM C920 Type S Grade NS Class 25Pro-Grade Plus Clear is paintable in 4-6 hoursPro-Grade Plus Colors are paintable in 2-4 hours
APPLICATION GUIDELINESApplication temperature: Above 40°FCoverage (maximum): Approximate length of bead according to bead diameter:Container bead: 1/4" bead 10.1 oz cartridge is 31 ftWorking time: Approx. 10-15 minutes for a 1/4" beadWorking surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designedjoint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately.Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.LIMITATIONSNot designed for continuous submersion or use below thewaterline. Air, caulk and surface temperature should be above40°F. Do not apply if rain is expected within 12 hours. Clearsealant will be white during application but will clear within 7-14days. Cure time is dependent upon ambient conditions includingtemperature and humidity. The caulk should be dry to the touchand ready to paint in 2-4 hours with a water-based (latex) paintthat does not contain plasticizer. Clear is paintable in 4-6 hours.For other paint types, a compatibility test is recommended. It ishighly recommended to use backing material. For best results,store in a dry location at or below 75°F.