The first elastomeric, water-based sealant with 100% joint movement**Clear offers 25% joint movementFor interior and exterior applicationsUV resistantFor windows and doorsFor vinyl, metal, glass, wood, PVC, concrete, aluminum and all types of sidingSpans up to 2" wide, stays flexible, crackproof, paintable and VOC-compliantCertified to Federal Specification TT-S-00230C, ASTM C920, CLASS 100/50 (white and colors), ASTM C920, Class 25/25 (clear), ASTM C834, Type OP, Grade -18ºC, LEED v4.1 (white and colors), AAMA 803.3-16 Type I (white and colors),AAMA 808.3-16 Type I (white and colors) APPLICATION GUIDELINESApplication Temperature: Above 40°F and below 120°FService Temperature Range: 0°F-160°FMethod of Application: Cartridge/caulking gunWorking time: Approx. 15 minutes for a 1/4" bead.Working surfaces: Surfaces should be cleaned down to the original substrate, dry and free from excessive oil, grease, water, dirt or any material that may deter adhesion.Painting: 2-4 hours with a high-performance water-based (latex) paintCleanup: Clean excess material with a damp cloth. Clean hands and tools with soapy water. Scrape dried excess.LIMITATIONSDo not apply if rain is expected within 24 hours. Air, sealant and surface temperature should be above 40°F and rising. Protect from rain for 24-48 hours after application. Dry time may be extended in humid or cold conditions. Painting may occur within 2-4 hours after application with a high-quality water-based (latex-based) paint. For other paint types, a compatibility test is recommended. To ensure neat sealant lines, mask areas adjacent to joints. Always apply sealant in a bead form. Once sealant is dry to the touch and does not transfer, removemasking tape. If joint depth exceeds 1/2", use backing material. NOTE: Highly recommend using backer rod/backing material for all joints. Sealant may appear to have a different tint/color when initially extruded until it is fully dried/cured. Not designed for continuous submersion or use below the waterline. Store unusedproduct in dry location at or below 70°F (21°C). Not for use with nail holes or butt joints. Coverage (maximum): Approximate length of bead according to bead diameter:Container bead = 10.1 oz Cartridge1/8" bead = 123 ft.1/4" bead = 31 ft.3/8" bead = 14 ft.1/2" bead = 8 ft.10.1 oz. Cartridge - Duramaster™ Sealant
- Titebond®
- Finish: White
- Packing: 12 each/box. Sold in full box quantities only.
- Note: Unit of measure are Boxes. Each Box contains 12 pieces. When you are purchasing a quantity of 1 you will get one box of 12 pieces. We are unable to break open the box quantity, therefore we are unable to sell you this item in multiples other than 12.
|