Q: How do I disable the horn
A: Please advise the scenario by which you want or need to disable the horn from this unit. I will help me formulate my answer.
Q: Please advise in regards to disabling the horn, house is a new construction and was installed by the builder almost 10 years ago.. last week the alarm started going off for no reason.. please advise how to disable or the device needs maintainence or needs to be replaced and the cause of the alarm going off.. please advise/provide instructions.
A: The unit that you have might indeed need to be replaced however please see step number four of the document as seen here:
Download File
and perform all of the troubleshooting scenarios and if you cannot rectify the problematic Behavior proceed to step 5 of the same document.
Q: How many wires does it have? Two or four?
A: Per the link to the installation manual as seen here:
Download File
The GX93 has two terminals for power-in and power-out supply circuits
Q: Can I simply disconnect the wires to disable an individual horn? Will this cause the entire system to go down? I have three of these horns in a 1200 sq. ft apt. and the sound is excruciating
A: The installation of this material is governed by established building code.
Before making any changes to the installed annunciators be absolutely sure to check with local building code, local authority having jurisdiction and NFPA 72.