Home > Bathroom Hardware > Shower Door Hardware > Shower Hinges > Wall Mount-Full Back Plate > Vienna Series > 337 Adjustable > CRL V1E337BBRZ

CRL V1E337BBRZ

Name: CRL V1E337BBRZ Vienna 337 Series Adjustable Wall Mount - Full Back Plate Hinge - Brushed Bronze
Brand: C. R. Co., Inc.
SKU: CRL V1E337BBRZ
Price: 85.00 USD

CRL V1E337BBRZ Vienna 337 Series Adjustable Wall Mount - Full Back Plate Hinge - Brushed Bronze

× This image is for a similar product but it will differ in size, color and/or other attributes.

CRL V1E337BBRZ Vienna 337 Series Adjustable Wall Mount - Full Back Plate Hinge - Brushed Bronze

Price: $85.00 USD

Comments (Optional)

ADD TO CART

In Stock (Minimums Apply):

Dallas Qty: 69

Tampa Qty: 1

Las Vegas Qty: 7

Houston Qty: 28

Kent Qty: 31

Secaucus Qty: 28

Solon Qty: 18

Union City Qty: 8

Rock Hill Qty: 6

San Diego Qty: 4

Atlanta Qty: 41

Orlando Qty: 3

Hamilton Qty: 4

Phoenix Qty: 2

Hazelwood Qty: 2

Los Angeles Qty: 428

Elgin Qty: 34

Standard Lead Time - For quantities beyond the "In Stock" levels available above, please reach out to our sales department for a quoted estimated lead time.

Additional Declarations - CRL has a order minimum of $45.00 - if your CRL total is less than this amount, the lead time approximately 2-3 weeks before it would ship. Simply exceed this minimum order amount from CRL so that we can drop ship the material to your location.

+ Add to My Wish List

1-773-809-3667

Sales

sales@absupply.net

Technical Support

tech@absupply.net

Product Description:

Adjustable to Any Angle Up To 90 Degree Without Removing Door
Adjustable Wall Mount Full Back Plate
Finish: BRUSHED BRONZE
3 Year Warranty


Product Information	Cut Sheet

Function

The CRL Adjustable Vienna Series has taken our popular Vienna Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is hung
Simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position
The door can swing 90º inward and also 90º outward (adjusting angle from factory set position will reduce 90º swing in that direction)
For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5º inside the shower area, thus having the door close snugly against the jamb

Additional Product Information

STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Vienna Hinges come with the 90º side activated. Pre-Set Models come with the Pin pre-set for 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90º. If the standard 5º Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º)
Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm). Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm)
Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Features: Adjustable to any angle up to 90º without having to take door down
Construction: Solid Brass
Hinge Swings: 90º in and 90º Out
Closing Type: Self-Centering when within 15º of closed position
Includes: Gaskets, Screws, and Glass Fabrication Dimensions
Cut-Out Required
NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles.