Home > Storefronts & Entrances > Glass Entrance System > Wedge-Lock Door Rails and Accessories > 10" Square Door Rails > Without Locks > CRL DR10SPS34S

CRL DR10SPS34S

Name: CRL DR10SPS34S 10" Square Style Door Rail Without Lock for 3/4" Glass - 35-3/4" Length - Polished Stainless
Brand: C. R. Co., Inc.
SKU: CRL DR10SPS34S
Price: 790.67 USD

CRL DR10SPS34S 10" Square Style Door Rail Without Lock for 3/4" Glass - 35-3/4" Length - Polished Stainless

× This image is for a similar product but it will differ in size, color and/or other attributes.

CRL DR10SPS34S 10" Square Style Door Rail Without Lock for 3/4" Glass - 35-3/4" Length - Polished Stainless

Price: $790.67 USD

Comments (Optional)

ADD TO CART

Standard Lead Time - Please reach out to our sales department for a quoted estimated lead time.

Additional Declarations - CRL has a order minimum of $45.00 - if your CRL total is less than this amount, the lead time approximately 2-3 weeks before it would ship. Simply exceed this minimum order amount from CRL so that we can drop ship the material to your location.

+ Add to My Wish List

1-844-809-3667

Sales

sales@absupply.net

Technical Support

tech@absupply.net

Product Description:

10" Square Style Door Rail Without Lock for 3/4" Glass - 35-3/4" Length - Polished Stainless

Other Rails Available for Use with Different Glass Thicknesses
Patented Wedge-Lock™ Glass Securing System
Adjust and Align Doors without Removal
Available With or Without Locks
Six Standard Architectural Finishes, with Custom Finishes Available, Custom Sizes are Also Available
Matching Sidelite Rails Available
Finish: Polished Stainless

Cut Sheet

Function

A totally new concept for securing the glass in the door rail, the CRL Wedge-Lock™ Door Rail System features the exclusive CRL Wedge-Lock™ Securing System (U.S. Patents 6,434,905 and 6,912,818 B2, Canadian Patent 2,419,706, and European Patent No. EP 1 404 939 B1).
It works by applying pressure from the bottom of the door rail, using two glass retaining aluminum extrusions via a flat stainless steel bar. As this bar is pulled down with socket head cap bolts, pressure is applied to the glass retaining aluminum extrusions. The bottom of the extrusions are at an angle and fit into an angled groove in the door rail. As the glass retaining extrusions are being pulled down, the angled wedge in the door rail also pulls the glass retaining extrusions together.
This action, along with our specially designed door retaining gasket, creates a tremendous amount of force (more than 900 lbs.) in our 9" (228.6 mm) Corner Rail. That's 100 lbs. per inch. Imagine how much force is created in our full length Door Rails!

Additional Product Information

ORDERING INFORMATION:
Models with Locks are supplied with the Lock Mechanism installed. Matching finish Keyed Cylinders or Thumbturns must be ordered separately.
End Caps are included in the stock Door Rail. Door Rail length (including End Caps) must be specified when ordering Custom Length Rails. For replacement End Caps enter DREC4T into the search box.
All Door Rails are supplied with standard Kwik-Adjust™ Pivot Alignment System. Closer Arms and Floor or Overhead Pivots must be ordered separately.
NOTE: All Wedge-Lock™ Door Rails feature the built-in Jamb Alignment Block, but arms and pivots must be ordered separately to meet job requirements.
The Wedge-Lock™ Glass Securing System gives you more than a secure attachment to the glass. It provides the fastest installation time of any door rail system offered to the industry. Experienced installers can have a door prepared for installation in less than ten minutes. CRL Wedge-Lock™ Door Rails come completely fabricated and ready to install right out of the carton with the End Caps installed. After the rail is installed, the only thing required before hanging the door is to attach the door arm or pivot (not included) to the adjustable door alignment slide already assembled in the Door Rail. The Adjustable Door Alignment System feature allows you to adjust the door 1/8" (3.2 mm) toward or away from the jamb without removing the door. This is standard on both top and bottom rails. After the door is installed all you need do to adjust the door is to remove the End Cap. This will reveal three socket head cap bolts. The center bolt is the securing bolt used to lock the adjustable slide in position. The two outer bolts are used to adjust the slide 1/8" (3.2 mm) in or out. The low profile of the adjustable slide allows the pivots with slotted grooves to be moved to a position other than the American Standard Setback of 2-3/4" (69.8 mm). This means we can fabricate them for vertically out-of-square openings. Other reasons to choose CRL Wedge-Lock™ Door Rail System: Models are available to accept 3/8" or 1/2" (10 or 12 mm) glass; a rigid single component housing that will not shift and fall out of adjustment over time because it is not made up of two halves; the internal components do not require removal before installation; the glass securing pads are designed for longevity in extreme environments.