Q: I don't know the model of my hinges, but I need gaskets. Height - approx 3.5" --- width - approx 2 3/16" thank you in advance for any help
A: Do the measurements of your wall plate match this:
Download File
Please review and advise.
Q: Hey folks, I got a very helpful reply including a diagram to my original question as you can see below. I then responded with adjusted measurements, but I haven't heard back. I'll cut and paste my original response below. I look forward to making a purchase once I know exactly what I need: Thank you so much for the clear and concise reply. My measurements resemble those in your diagram, but the height and width were slightly different. Here are my measurements as compared to yours: 3 1/2 - 3 5/8 1 7/8 - 2 2 3/4 - same 1 3/8 - same 3/8 - same 1/4 - same Should I stick with the product you linked to or is there a better option with these measurements? Thank you, and I hope you're having a nice holiday season.
A: These dimensions confuse me:
3 1/2 - 3 5/8
1 7/8 - 2
Are your dimensions not the same top and bottom and left to right?
Q: I apologize. I could have made that more clear. The height and width measurements as shown in your diagram (3 1/2 x 1 7/8) are slightly different than my hinge which is 3 5/8 x 2. I understand that finding the perfectly sized gasket may be difficult, so I'd be happy to take your professional opinion as to which item you carry that gets me close enough. Thanks again.
A: Does the preparation in your glass match this template:
Download File
Please review and advise.
Q: I'm trying to replace gaskets on my hinges which measure approximately 3"x2" overall.
A: Very good - I am sure that we can help you.
Please reply to this email with photographs of your existing hinge and we will attempt to make a match and then supply you with a link to the proper gasket.
Q: I have a hinge that is 3-9/16" by 2", with holes that are 1 3/8 center to center. I believe it is the hinge that you showed in your answer to a previous question. The gasket is 1/16 inch wide. Could you tell me which gasket to buy? It is black
A: Please reply to this email with a photograph of your hinge and we will identify it and suggest the appropriate replacement gasket.
Q: Do you have the Cologne series gasket in clear plastic?
A: No - the
CRL C0LGK1 Cologne Series Hinge Replacement Gasket Pack With Fin - Black Neoprene
is available in black neoprene only.
Q: I'm thinking of putting a gasket between my metal door hinges, 3 + 1/2" X 2", that connect my ply wood door to my shed...to prevent wood rot a bit. Will this work at all?
A: Between the wood and the metal I don't believe that it would hurt adding a gasket - I think the key more so is to completely seal the area underneath the hinge and the plywood.
Q: I need gasket with fin for Junior Geneva hinge - is the CRL C0LGK1 the correct replacement item?
A: According to CRL October 2025
It seems our junior geneva gasket replacements have been discontinued.