Q: Just purchased brand new Pella Patio Door with 4 - 3 1/2" Pella Hinges Oil Rubbed Bronze. Need the long throw hinge to allow door to open back against wall. My hinges have 5/8" radius corners and are oil rubbed bronze. Can you supply?
A: We can supply wide throw hinges with a 5/8 rad. corner in an oil rubbed bronze, but what I would dell you will differ in both the thickness of the leaf, which would be .129" thick, and the location of the holes for the screws, which can be viewed here:
Download File
Is there a follow up question that we can perhaps attempt to answer? We take pride in our technical expertise so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.
Q: I have a Thermo-Tru french door with HG58-1C-S hinges (4 in Square to 4 in 5/8 radius) in brushed nic and want to replace then with 4x6 wide throw with the same configuration can you help?
A: We can indeed help you with swing clear hinges for this application however the job will require routing the door and frame for the thicker hinge leaf required by the wide throw hinge and then dowling closed the existing screws holes and redrilling the door and frame for the hinge screws.
If these two steps do not deter you, please reach out to our sales department and we will enter this order for you.
Q: Do you have in brass? Or brass 3 by 6.
A: 3 x 6 is not an size available in any finish - can you use 3-1/2 x 6 and if yes we have the Bommer 5010-356-632 Plain Bearing-5 Knuckle-Full Mortise-Wide Throw-Steel Base-3.5" x 6" Hinge-Removable Pin-Polished Brass as seen here:
Click Here
in stock
Q: Thank you, are they in two packs? We need a total of six hinges
A: Unless otherwise noted hinges are sold and priced per hinge.