Home > Bathroom Hardware > Grab Bars > Mountings > Bobrick > Fasteners > Bobrick 251-4

Bobrick 251-4

Name: Bobrick 251-4 WingIt Grab Bar Fastener for 2-1/2" or deeper hollow walls
Brand: Bobrick
SKU: Bobrick 251-4
Price: 95.142 USD

Bobrick 251-4 WingIt Grab Bar Fastener for 2-1/2" or deeper hollow walls

× This image is for a similar product but it will differ in size, color and/or other attributes.

Bobrick 251-4 WingIt Grab Bar Fastener for 2-1/2" or deeper hollow walls

Price: $95.14 USD

Comments (Optional)

ADD TO CART

Low Inventory - This product is discontinued
but there are 3 left in stock
and ready for shipment. Order today.

+ Add to My Wish List

1-773-809-3667

Sales

sales@absupply.net

Technical Support

tech@absupply.net

Product Description:

Bobrick B-251 Grab Bar Fastener

Product Specification

Item #	Description
B-251	Bobrick 251-4 WingIt™ Grab Bar Fastener

Specifications:

	Corrosion-resistant stainless steel
	Install all Bobrick Grab Bar Series without backing; no need to open and reconstruct walls
	For walls with a min. of 5/8" (16mm) thick painted or tiled drywall
	Can also be used on 1/2" (13mm) thick drywall with added finished wall material
	Fastener will support 300-lb load exceeding all building code and governmental agency guidelines including ADA Accessibility Guidelines in the U.S.A
	For 2-1/2" and 3-1/2" (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4" to 1-1/2" (6 to 38mm) thick.
	One fastener required for each flange
	Patented
	WingIt™ is a trademark of WingIt Innovations, LLC
How to Install the Grab Bar Fastener:

Materials:

Diameter of grab bars should be 1-1/4" to 1-1/2" (32-38mm) with 1-1/2" (38mm) clearance from the wall, and should not rotate in their fittings. Required mounting height is universally 33" to 36" (840-915mm) from the centerline of the grab bar to the finish floor. Structural strength of all grab bars and their mounting devices should withstand more than 250 pounds of force (1112 N). For all barrier-free toilet compartments, individual toilet rooms and guest bathrooms, it is recommended that a 36" (915mm) min. horizontal grab bar be installed on the back wall over the toilet and a 42" (1065mm) min. horizontal grab bar be installed on the side wall or partition nearest the toilet. This can also be accomplished with a single horizontal two-wall grab bar

Questions and Answers

Q: Hi Rich, I need your expertise have you ever seen a faster / quick release for a portable wall partition. The scenario is this court room has these divider walls fastened to the floor. However, they use this room for other things and want to take them in and out without much fuss. And not have a huge hole or bracket for people to trip over. So something flush to the floor we can retro fit the wall. If you can help, much appreciated. Photo here:

View Image

A: Do you have access to the floor from the underside? Is there a lower level under that floor? My thought was using electromagnetic locks which would permit a concealed installation but without access to the floor from below I don't see a safe way to secure those and permit a quick and easy removal.

Architectural Builders Supply Product Suggestions: