ASI 9014

Name: ASI 9014 Surface Mounted Horizontal Baby Changing Station - Plastic
Brand: ASI
SKU: ASI 9014
Price: 417.15 USD

ASI 9014 Surface Mounted Horizontal Baby Changing Station - Plastic

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $417.15 USD

Comments (Optional)

In Stock (Minimums Apply):

Yonkers, NY Warehouse Qty: 212

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI 9014 Surface Mounted Horizontal Baby Changing Station - Plastic

Two-part adjustable safety strap
110 lbs. load capacity
Built-in bed liner and towel dispensers
Multi-lingual instructions
Changing surface is fabricated of FDA-approved fungus- and bacteria-resistant solid plastic
One handed operation
Overall size: 35-5/32”x 24-1/4”x 3-7/8” (893 x 616 x 99 mm)

Operation

Unit platform is shaped to keep a child restrained from rolling out of the bed.
Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use.
Unit is operable with less than 5lb of force (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist.
Bed liner/towel dispenser presents liners or towels for user hygiene and convenience.
Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners.
Safety strap is easily adjustable by user for baby size and Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent.
Liners/towels are easily replenished by service personnel as required.

Installation

Locate wall studs at 16” [406] OC for fastening the station. If two (2) wall studs cannot be used, use two (2) screws into ONE stud and drill pilot holes and install toggle fasteners securely in the wall at non-stud location.
Attach unit to wall studs with four (4) 1/4” x 3” long Phillips pan head self-tapping screws through flat washers.
Where wall studs are not available attach with four (4) 1/4” - 20 x 3” pan head bolts with flat washers into toggles or expansion nuts.