Home > Bathroom Hardware > Childcare Products > Changing Stations > ASI 9013

ASI 9013

Name: ASI 9013 Recessed Mounted Baby Changing Station - Horizontal - Full Stainless Steel Housing
Brand: ASI
SKU: ASI 9013
Price: 2232.11 USD

ASI 9013 Recessed Mounted Baby Changing Station - Horizontal - Full Stainless Steel Housing

× This image is for a similar product but it will differ in size, color and/or other attributes.

ASI 9013 Recessed Mounted Baby Changing Station - Horizontal - Full Stainless Steel Housing

Price: $2,232.11 USD

Comments (Optional)

ADD TO CART

In Stock (Minimums Apply):

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

+ Add to My Wish List

1-844-809-3667

Sales

sales@absupply.net

Technical Support

tech@absupply.net

Product Description:

ASI 9013 Recessed Mounted Baby Changing Station - Horizontal - Full Stainless Steel Housing

Two-part adjustable safety strap
400 lbs. load capacity
Built-in bed liner and towel dispensers
Multi-lingual instructions
Changing surface is high impact resistant plastic with a gloss finish for easy cleaning
Satin stainless steel exposed surfaces
Overall size (closed): 37” x 25 1/2” x 1/4” (940 x 648 x 6 mm)
Overall size (open): 37” x 25 1/2” x 17 3/4” (940 x 648 x 451 mm)

Cut Sheet

Owners Manual and Installation Template

Operation

Pull down changing table is counterbalanced with a damped gas spring and can be opened or closed with one hand by grasping pull handle.
Secure the child in place by using child protection safety strap.
The safety strap and cam buckle are assembled by sliding the safety strap into the cam buckle until it is snug on child.
Tighten or loosen the strap by pulling the strap end through and clamping the buckle.
To unbuckle the strap simply lift the buckle lever.

Installation

Provide rough wall opening 34-1/4" (870mm) wide x 22-3/4" (578mm) high x 3-3/4" (95mm) minimum depth from face of finished wall.
Mount unit in wall opening using either four (4) No 10 x 1-1/2" (38mm) long self-tapping screws through side holes or four (4) 3/8" x 2" (51mm) lag screws (or other fasteners appropriate for wall conditions) through mounting holes in rear wall of cabinet.
Use washers and snap covers provided. For compliance with ADA Accessibility Guidelines, install unit so that top edge of changing table is 32" to 32-3/8" (813mm to 822 mm) above finished floor (AFF).
See installation instructions packed with unit.

Questions and Answers

Q: Hello, Looking for parts for a ASI 9013 changing table. Need: Plastic door handle Gas Spring Can you supply straps and plastic doors also? Only see items for 9012 on the site. Thanks, Barry

A: Here are the products:

Click Here

(Required, used to email you once question is answered.)

Customers who bought this item also bought: