ASI 8205-R

Name: ASI 8205-R Right Hand Padded Fold-Up Shower Seat
Brand: ASI
SKU: ASI 8205-R
Price: 461.15 USD

ASI 8205-R Right Hand Padded Fold-Up Shower Seat

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $461.15 USD

Comments (Optional)

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI Surface Mounted Right Hand Padded Fold-Up Shower Seat

Seat is sponge cushion covered with off-white Naugahyde® mounted on 1/2" (13mm) thick marine grade plywood
Metal supports have satin finish
Satisfies ADA Accessibility Guidelines when mounted properly
Can hold in excess of 500 pounds when installed properly

Operation

Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for departure and arrival.
Guide bracket with spring detent prevents seat from dropping and provides positive support in usage position as well as spring locked storage position.

Installation

This unit is surface mounted.
Installer/contractor must provide concealed anchor plate or blocking as specified in construction documents or as required by local building codes prior to wall finishing.
Fasten unit flanges and guide bracket to concealed anchor or blocking plate with appropriate hardware.
See “STRENGTH” section below.
Note that concealed mounting plates or anchors and hardware are not supplied with this product.
Ensure that mounting configuration complies with local building codes.

Strength

Designed to meet and exceed ADAAG requirements as published in ICC/ANSI A117.1-2003 section 610 and CFR 28 Part 36, Federal Register Vol. 56, No 144, July 26, 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4 kg) and unit shall conform to size and edge clearances as diagrammed.
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Unit is load rated to support a weight of 500 lbs at front edge when properly installed and has been tested to successfully hold a weight in excess of 1000 lbs.