ASI 64673

Name: ASI 64673 Recessed Combo Paper Towel Dispenser, Waste Receptacle, and Hand Dryer
Brand: ASI
SKU: ASI 64673
Price: 1840.75 USD

ASI 64673 Recessed Combo Paper Towel Dispenser, Waste Receptacle, and Hand Dryer

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $1,840.75 USD

Comments (Optional)

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI Recessed Combo Paper Towel Dispenser, Waste Receptacle, and Hand Dryer

Dispense 800 standard multi-fold or 600 standard C-fold or 1100 standard single fold paper towels.
Waste capacity of 5.28 gal (20 liters).
Two (2) tumbler locks keyed alike to other ASI washroom equipment.
Satin metal finish
Rough wall opening required is 11-1/2" W x 54-1/8" H x 6-1/2" D minimum (292 x 1375 x 165)
Cut Sheet

Operation

Paper towels are manually withdrawn through dispensing slot.
A towel adapter ensures that towels feed properly until depleted.
Unit will continue to feed towels properly when reloaded with a partial load in place.
User activates dryer by placing hands in the sensor zone indicated by graphic on door.
Drying time is automatically initiated as long as movement is sensed up to a maximum of two (2) minutes to prevent accidental hold-on.
Dryer automatically shuts off after time-out when hands are removed from the sensor zone.
Refill dispenser by unlocking door and replacing towels for an empty or partially empty unit.
Dispenser supply is replenished and waste container is emptied manually on cycles determined by maintenance needs.
Locking full-face door over compartments prevents unauthorized access or removal.

Installation

Unit is mounted in wall recess using No 10 self-tapping screws (by others) through concealed mounting holes provided.
Recommended mounting height of 55" (1397) to centerline of towel dispenser slot requires top of Rough Wall Opening (RWO) to be 70-1/4" (1784) AFF.
See unit diagram for electrical service cable rough-in location.
Electric service of 100- 240VAC 20A 50/60 Hz (provided by others) is brought to RWO at location indicated on diagram above and is hooked up (by others) in accordance with schematic and Owner’s Manual provided with unit.
Dryer is mounted to chassis wiring box with four (4) 1/4-20 pan head screws (provided) through bushings in heavy-duty back plate. Electrical service is connected (by Electrician) prior to installing cover.
Cover is secured to back plate with recessed socket-cap-head tamper-resistant pin-hex bolts (supplied) with security pin-hex driver (supplied)
Note that top of RWO is 3/4" (19) below top of unit. For compliance with ADA Accessibility Guidelines, install unit so that centerline of towel dispenser slot is 48" (1219) maximum above finished floor (MAX AFF).
Rough wall opening required is 11-1/2" W x 54-1/8" H x 6-1/2" D minimum (292 x 1375 x 165)