ASI 3802-60

Name: ASI 3802-60 60" Straight Grab Bar with Snap Flanges
Brand: ASI
SKU: ASI 3802-60
Price: 135.39 USD

ASI 3802-60 60" Straight Grab Bar with Snap Flanges

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $135.39 USD

Comments (Optional)

For quantities beyond the "In Stock" above, the item(s) ships in 1-4 business days.

Sales

Technical Support

Product Description:

ASI 3802-60 60" Straight Grab Bar with Snap Flanges

Dimensions

A = 60"

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Use grab bar as template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.

Optional Mounting Kits

Three (3) #12-24 x 1-1/2" long machine screws with matching lead expansion-shields
Order one kit per flange

1/4-20 x 1/2" long female threaded posts with 1/4-20 x 3/8" long Phillips pan head machine screws
Contains (3) female posts and (6) machine screws
Use for Back-to-Back mounting
Order one kit per flange

1/4-20 x 3/4” long female threaded posts with 1/4-20 x 3/8" long phillips pan head machine screws
Contains (3) female posts and (6) machine screws
Use for Back-to-Back mounting
Order one kit per flange

Two (2) 1/4-20 x 1-1/4" long machine screws with corresponding hex nuts and washers
For back to back mounting on 1/2" thick metal partitions
Order one kit per flange