 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
ASI 3701-36 |
ASI 3701-36 36" Straight Grab Bar with Snap Flanges
|
| |
| Manufacturer: ASI |
| Price: $30.45
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
|
| ASI 36" Straight Grab Bar with Snap Flanges |
|
 |
- Snap-on flange covers for concealed mounting
- Tubing: 1-1/4" (32mm) diameter x 18 gauge (1.2mm)
- Flange: 3-1⁄8" (79 mm) diameter, 1⁄8" (3 mm) thick
- Flange cover: 3-3⁄16" (81 mm) diameter
- Satin stainless steel
|
|
|
| Dimensions |
|
|
A =
36"
|
|
| Strength |
|
- Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
|
|
| Installation |
|
- Use grab bar as template to mark mounting hole locations and pre-drill holes.
- Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
- For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.
|
|
| Optional Mounting Kits |
|
| |
|
| Optional Anchor Plate |
|
- 3929 In Wall Anchor Plate
- Anchor is drilled and screwed, welded or wired to face of stud system or partition in exact mounting location to suit field conditions prior to application of finishing wall material.
- Steel plate 1/8′′ (3mm) thick x 4′′ (102mm) wide x 44" (1118mm) long
|
|
|
Customer Reviews
There are no customer reviews yet.
|
|
|