Home > Bathroom Hardware > Grab Bars > Straight > 1-1/2" Diameter > Exposed Mounting > Standard > ASI 3501-30

ASI 3501-30

Name: ASI 3501-30 30" Straight Grab Bar
Brand: ASI
SKU: ASI 3501-30
Price: 71.92 USD

ASI 3501-30 30" Straight Grab Bar

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $71.92 USD

Comments (Optional)

ADD TO CART

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days with $82.50 minimum purchase of ASI products or 15 business days for smaller orders.

ASI has a minimum order requirement. Orders smaller than the required minimum have a longer lead time as we need to consolidate onto a "stock" order. If you need a faster lead time, simply exceed the minimum order amount.

+ Add to My Wish List

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

ASI 30" Straight Grab Bar

Exposed Mounting
Tubing: 1-1/2" (38mm) diameter x 18 gauge (1.2mm)
Flange: 3" (76 mm) diameter, 1⁄8" (3 mm) thick
Exposed mounting screw holes are drilled and countersunk
Satin stainless steel

Cut Sheet

Dimensions

A = 30"

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Use grab bar as template to mark mounting holes locations and pre-drill holes.
Install bar using three (3) No10 self-tapping pan head screws (not supplied) or other fastener system (not supplied) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be install so that center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF.

Optional Mounting Kits

3900 Dry Wall Anchors
- #12 x 2-1/23 long self tapping phillips pan head screws
3920 Concrete or Masonry Wall Anchors
- 12-24 x 1-1/2" long machine screws with matching lead expansion-shields
3924 1/2" Thick Metal Partition Anchors
- For back to back mounting on 1/2" thick metal partitions
- 1/4-20 x 1/2" long female threaded posts with 1/4-20 x 3/8" long Phillips pan head machine screws
3925 3/4" Thick Metal Partition Anchors
- For back to back mounting on 3/4" thick metal partitions
- 1/4-20 x 3/4” long female threaded posts with 1/4-20 x 3/8" long phillips pan head machine screw