ASI 3424-52

copy to clipboard

ASI 3424-52 Grab Bar

enlarge
enlarge
× This image is for a similar product but it will differ in size, color and/or other attributes.
ASI 3424-52 Grab Bar
More from ASI
Price: $122.38 USD
Ships From
Comments (Optional)
Standard - ships in 4 business days.

1-844-809-3667

Sales
Technical Support
Product Description:
GRAB BAR (1-1/4" DIA.) SERIES WITH FLANGES FOR EXPOSED MOUNTING

3400 Series — 1 1⁄4" (32 mm) o.d.
• Flange is 3" (76 mm) diameter, 1⁄8" (3 mm) thick type 304 stainless steel with a satin finish.
• Exposed mounting screw holes are drilled and countersunk.

SPECIFICATION

Grab Bar with Flanges for Exposed Mounting shall be fabricated of 18-8 stainless steel type 304; tubing shall be 1-1/4" (32mm) dia. x 18 gauge (1.2mm). Flanges shall be heliarc welded to tubing with a continuous concealed bead and shall be 1/8" (3mm) thick. Flanges shall have three (3) countersunk holes to accommodate mounting screws (not provided). All exposed surfaces shall have No4 satin finish and be protected during shipment with a plastic bag. For optional non-slip surface add suffix –P (peened).

INSTALLATION

AASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg). Mounting to the wall is a critical part of the system to meet this requirement. To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

STRENTH

Use grab bar as template to mark mounting holes locations and pre-drill holes. Install bar using three (3) No10 self-tapping pan head screws (not supplied) or other fastener system (not supplied) to suit conditions for each flange. Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing. For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF. Anchors are available from ASI and must be specified separately (see 3900 series).


dispensers

toilet dispenser

Questions and Answers
There are currently no questions or answers.
(Required, used to email you once question is answered.)
Customers who bought this item also bought:
WB RP 110  24x24 Series Removable Panel   Access Door 24" x 24"
WB RP 110 24x24
24" x 24" Series Removable Panel Access Door.
Williams Brothers
Price: $91.67
  • Watch Expert Advice on YouTube
  • Corporate Members of DHI
  • Member of NFPA.
  • Follow us on Facebook
  • AAADM Certified!
  • ALOA Certified!
  • Follow us on Twitter
  • DHI FDAI EDA Inspector
  • AIA
  • Follow us on Pinterest
  • ARL
  • Intertek Logo