Home > Bathroom Hardware > Grab Bars > Straight > 1-1/2" Diameter > Concealed Mounting > Standard > ASI 3201-36

ASI 3201-36

Name: ASI 3201-36 36" Straight Grab Bar
Brand: ASI
SKU: ASI 3201-36
Price: 62.33 USD

ASI 3201-36 36" Straight Grab Bar

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $62.33 USD

Comments (Optional)

ADD TO CART

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days with $82.50 minimum purchase of ASI products or 15 business days for smaller orders.

ASI has a minimum order requirement. Orders smaller than the required minimum have a longer lead time as we need to consolidate onto a "stock" order. If you need a faster lead time, simply exceed the minimum order amount.

+ Add to My Wish List

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

ASI 36" Straight Grab Bar

Concealed Mounting
Tubing: 1-1/2" (38mm) diameter x 18 gauge (1.2mm)
Flange: 3" (76 mm) diameter, 1⁄2" (13 mm) deep
Three (3) tamper resistant 1/4-28 stainless steel hex socket set screws supplied for each flange
Satin stainless steel

Cut Sheet

Dimensions

A = 36"

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Tenon plates are secured to wall with a 1/4" bolt (by others) through an elongated slot that provides 1" (25mm) vertical range and 3/16" (5mm) horizontal range for fitting adjustment.
Flanges are then fitted over tenon plates and secured by tightening the hex socket set screws (provided).
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing.
Anchors are available from ASI (see below)

Optional Mounting Kits

3902 Dry Wall Anchors

#12 x 2-1/2" long self-tapping Phillips pan head screws
Order one kit per flange

3912 Metal Partition Anchors

For installing through 1/2" - 1" metal partitions
Order one kit per flange
3/16" (5mm) thick stainless steel plate x 3" (76mm) dia., with a 1/4-20 x 1-1/2" (38mm) long threaded steel rod welded on with a washer and nut to suit

Optional Anchor Plate

3919 In Wall Anchor Plate
- Anchor is drilled and screwed, welded or wired to face of stud system or partition in exact mounting location to suit field conditions prior to application of finishing wall material.
- 1/8" thick x 2" wide x 44" length