Your cart is currently empty.
CALL - TEXT - FAX
Glossary of Hardware Terminology
Paper Towel Dispensers
Towel Rolls - Automatic
ASI 204523A Recessed Mounted Paper Towel Dispenser
This image is for a similar product but it will differ in size, color and/or other attributes.
This product review video is for a similar product but it will differ in size, color and/or other attributes.
In Stock Ready for Shipment
ADD TO CART
An order for quantities beyond our Immediate availability above
ships in 4 business days.
+ Add to My Wish List
ASI Recessed Mounted Paper Towel Dispenser
Dispenses one 8" wide x 8" diameter standard towel roll up to 800 ft. long and one 8" wide stub roll up to 4" diameter.
Fabricated of 22 gauge stainless steel with satin finish.
Wall Opening:15 3/4” x 26” x 10” (400 x 660 x 254 mm)
Towels are dispensed one length at a time automatically when hands are placed in sensor zone until supply is depleted
Owner predetermines length of towel dispensed by making selections on three (3) three-position switches for length, delay, and economy.
Unit may be reloaded with a full roll to automatically start when finished with an existing partial roll and will continue to feed properly when reloaded with a full roll and partial roll is transferred to stub roll position.
Refill dispenser by unlocking door and replacing towel roll for an empty or partially empty unit.
Dispenser supply is replenished and batteries are replaced manually on cycles determined by maintenance needs.
LED indicates sensing and battery condition.
Locking door prevents unauthorized access and roll removal.
Provide adequate in-wall reinforcement (by others) in drywall construction to hold mounted unit in-service after wall is finished.
Provide appropriate anchors (by others) to suit wall and field conditions for installation into walls other than new drywall.
Mount unit in wall recess using № 10 self-tapping screws (by others) through concealed mounting holes provided.
Note that top of RWO is 7/8" (22) below top of unit.
For compliance with ICC/ANSI A-117.1-2003 and ADA Accessibility Guidelines install unit so that top edge of towel dispenser opening is 48" (1219) maximum above finished floor (MAX AFF) only if clear floor reach access is provided.
Be advised that local codes may require mounting so that top of towel dispenser opening is 40" (1016) MAX AFF (e.g. California UBC/Title 24).
For general utility install unit with top of towel dispenser opening between 49" and 56" (1245 to 1422) AFF.
Sensor ground wire must be connected inside cabinet.
Questions and Answers
There are currently no questions or answers.
(Required, used to email you once question is answered.)
Customers who bought this item also bought:
ASI R-004 Toilet Tissue Roller Spindle
ASI replacement roller for use with 0030 series toilet tissue dispensers.
ASI 8154 Specimen Pass Through Box - Recessed
ASI recess mounted satin stainless steel specimen pass-through cabinet, Accommodates wall thicknesses 1-3/4" - 5 1/2"
ASI E-114 Replacement Key
ASI replacement key for use with ASI tumbler locks.
ASI 0030 Hide-A-Roll Toilet Tissue Dispenser
ASI surface mounted satin stainless steel hide-a-roll toilet tissue dispenser.
ASI R-002 Toilet Tissue Roller Spindle
ASI replacement roller for use with 0263 and 0264 series toilet tissue dispensers.