Home > Bathroom Hardware > Toilet Tissue & Seat Cover Dispensers > With Napkin Disposal > Partition Mounted > ASI 0481-HC

ASI 0481-HC

Name: ASI 0481-HC Dual Access Toilet Tissue and Seat Cover Dispenser with Sanitary Napkin Disposal
Brand: ASI
SKU: ASI 0481-HC
Price: 417.6 USD

ASI 0481-HC Dual Access Toilet Tissue and Seat Cover Dispenser with Sanitary Napkin Disposal

× This image is for a similar product but it will differ in size, color and/or other attributes.

ASI 0481-HC Dual Access Toilet Tissue and Seat Cover Dispenser with Sanitary Napkin Disposal

Price: $417.60 USD

Comments (Optional)

ADD TO CART

Standard - ships in 4 business days.

+ Add to My Wish List

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

ASI Partition Mounted Dual Access Toilet Tissue and Seat Cover Dispenser with Sanitary Napkin Disposal

One side mounts flush on barrier-free compartment side to allow grab bar clearance
Dispenses 1000 paper seat covers contained in supply box
Dispenses four (4) rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper (2 each side)
Waste container capacity of 1.3 gallons
Satin stainless steel
Tumbler locks keyed like other ASI equipment
Partition Cut Out: 15-1/2" W x 28-7/8" H (394mm x 733mm)

Cut Sheet

Operation

Users push disposal doors to deposit waste material.
Doors are self-closing and operate independently and may be used simultaneously.
Maintenance schedule determines waste removal cycle.
Unit is emptied by unlocking door and removing bottom waste container and inverting over collection bag.
Waste container is behind locked door to prevent inadvertent dumping and unauthorized removal, and safety-edged finger hole provides convenient grip for service.
Seat covers are selffeeding until supply is depleted and dispenser is manually reloaded with a full box through access door on schedule determined by maintenance requirements.
Toilet paper spindles are carried in sub-frame accessible when door is opened for replacement of paper rolls.
Toilet paper rolls feed freely until depleted. Level of supply is constantly visible for low-level warning.

Installation

Partition Cut Out Required 15-1/2" W x 28-7/8" H (394mm x 733mm).
Unit is mounted in partition using No10 self-tapping screws (supplied).
One trim mounting flange adjusts for partition thickness of 1/2" (13mm) to 3-3/4" (95mm).
For compliance with ADA Accessibility Guidelines, top of cutout should be between 56-7/8" (1445mm) and 45-1/4" 1149mm) AFF.
To comply with CalDAG mounting height and for use with grab bar, top of cutout should be 45-1/4" (1149mm) AFF and cutout shall have its bottom edge 16-3/8″(416mm) AFF.
If grab bar is used it is positioned across unit at 33 ″ (838mm) AFF to center line.