ASI 0185-93

Name: ASI 0185-93 Automatic Surface Mounted Sensor Hand Dryer - Satin Stainless Steel
Brand: ASI
SKU: ASI 0185-93
Price: 686.05 USD

ASI 0185-93 Automatic Surface Mounted Sensor Hand Dryer - Satin Stainless Steel

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $686.05 USD

Comments (Optional)

In Stock (Minimums Apply):

Yonkers, NY Warehouse Qty: 335

For quantities beyond the "In Stock" above, the item(s) ships in 1 business day.

Sales

Technical Support

Product Description:

ASI 0185-93 Automatic Surface Mounted Sensor Hand Dryer - Satin Stainless Steel

Quick Drying - Under 25 Seconds Surface Mounted Sensor Hand Dryer
No Touch - Energy Efficient Operation
Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone.
Motor and heating element shall have internal resetting automatic thermal protection.
Cover shall be fabricated of one-piece, 16 gauge (.063", {1.6}) thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel.
Universal Voltage - Automatically Adjusts to Voltages of 100 to 240 VAC - 50/60 Hz.
Modern Design and Durable.
Motor: 1/4 HP - 7500 RPM - Brush Type
Voltage: 100-240 – 50/60 Hz
Air Output: 185 CFM - Temp: 149° F (65° C)
Heater: 2020 Watts
Current: 17.6 Amps @ 120 Vac
Finish: Satin Stainless Steel
Cover shall be fabricated of one-piece, 16 gauge (.063", {1.6}) thick drawn steel
All exposed surfaces finished with acid, chip and scratch resistant porcelain enamel
Overall size: (Conforms to ADA) 14-7⁄16″ x 10-13⁄16″ x 3-15⁄16″ (367 x 275 x 100 mm)


Cut Sheet	Manual	Template

Operation

User activates dryer by placing hands under sensor.
LED in sensor array shines blue light during operation to guide user to optimal hand placement for shorter drying time.
Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Installation

Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate.
For masonry walls use expansion bolts or anchors for 1/4" (6mm) screws.
Electrical service is supplied and connected (by others) prior to installing cover.
Cover is secured to back plate with two (2) hex socket security screws (supplied).
For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of dryer is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) max.
AFF if clear floor forward reach access is only provided.
For general utility install unit so that bottom edge of dryer is 45" to 50" (1143mm to 1270mm) AFF.
For two or more dryers, dryers should be no closer than 24" (610mm) on center.