ASI 0185 208

Name: ASI 0185 208VAC Hand Dryer - White
Brand: ASI
SKU: ASI 0185 208
Price: 687.68 USD

ASI 0185 208VAC Hand Dryer - White

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $687.68 USD

Comments (Optional)

In Stock (Minimums Apply):

Yonkers, NY Warehouse Qty: 608

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI Surface Mounted 208VAC Sensor Hand Dryer

Quick drying - under 25 seconds
No touch energy efficient operation
Steel cover with porcelain enamel finish (except for stainless steel colors)
Self adjusting time-out and fail-safe off protection controlled by a microprocessor that detects and rejects false signals and automatically self calibrates to provide uniform sensitivity over its entire life span.
Conforms to ADA
10-3⁄4" H x 14-1⁄2" W x 4" D (275mm x 370mm x 100)


Cut Sheet	Manual	Template

Mechanical Information

Volts: 208VAC
Hertz: 50/60Hz
Amps: 15.9
Watts: 1654
Motor: Brush type dual ball bearings
H/P: 1/4
RPM: 7500
Fan Type: Single Inlet Centrifgal
Air Flow: 185 CFM
Heating Element: 1519 Watt Nichrome wire with auto reset circuit breaker @ 104VAC
Heat Temp: 140° F (60o C) @ 77° F (25° C) ambient room temperature

Operation

Dryer is activated by user placing hands under sensor.
Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Installation

Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate.
For masonry walls use expansion bolts or anchors for 1/4" (6mm) screws.
Electrical service is supplied and connected (by others) prior to installing cover.
Cover is secured to back plate with two (2) hex socket security screws (supplied).
For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of dryer is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) max.
AFF if clear floor forward reach access is only provided.
For general utility install unit so that bottom edge of dryer is 45" to 50" (1143mm to 1270mm) AFF.
For two or more dryers, dryers should be no closer than 24" (610mm) on center.

Parts