ASI 0165-40 115

Name: ASI 0165-40 115VAC Hand Dryer
Brand: ASI
SKU: ASI 0165-40 115
Price: 493.63 USD

ASI 0165-40 115VAC Hand Dryer

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $493.63 USD

Comments (Optional)

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI Surface Mounted 115VAC Sensor Hand Dryer

Quick drying - under 30 seconds
No touch energy efficient operation
Heavy duty grey cast aluminum cover finished with acid, chip and scratch resistant epoxy enamel
Self adjusting time-out and fail-safe off protection controlled by a microprocessor that detects and rejects false signals and automatically self calibrates to provide uniform sensitivity over its entire life span.
11-1⁄4" H x 11-1⁄2" W x 4" D (285 x 290 x 100 mm)


Cut Sheet	Instructions	Template

Mechanical Information

Volts: 115VAC
Hertz: 50/60Hz
Amps: 14.4
Watts: 1653
Motor: Brush type dual ball bearings
H/P: 1/4
Fan Type: Single Inlet Centrifgal
Air Flow: 180 CFM (306 m /h)
Heating Element: 1488 Watt Nichrome wire with auto reset circuit breaker @ 115VAC
Heat Temp: 140o F (60o C) @ 77o F (25o C) ambient room temperature

Operation

Dryer is activated by user placing hands under sensor.
Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Installation

Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate.
For masonry walls use expansion bolts or anchors for 1/4" (6mm) screws. Electrical service is supplied and connected (by others) prior to installing cover.
Cover is secured to back plate with two (2) hex socket security screws (supplied).
For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of dryer is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) max.
AFF if clear floor forward reach access is only provided.
For general utility install unit so that bottom edge of dryer is 45" to 50" (1143mm to 1270mm) AFF.
For two or more dryers, dryers should be no closer than 24" (610mm) on center.