Home > Bathroom Hardware > Hand & Hair Dryers > Surface Mounted > Automatic > ASI 0165 115

ASI 0165 115

Name: ASI 0165 115VAC Hand Dryer
Brand: ASI
SKU: ASI 0165 115
Price: 472.25 USD

ASI 0165 115VAC Hand Dryer

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $472.25 USD

Comments (Optional)

ADD TO CART

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

+ Add to My Wish List

1-844-809-3667

Sales

sales@absupply.net

Technical Support

tech@absupply.net

Product Description:

ASI Surface Mounted 115VAC Sensor Hand Dryer

Quick drying - under 30 seconds
No touch energy efficient operation
Heavy duty white cast aluminum cover finished with acid, chip and scratch resistant epoxy enamel
Self adjusting time-out and fail-safe off protection controlled by a microprocessor that detects and rejects false signals and automatically self calibrates to provide uniform sensitivity over its entire life span.
11-1⁄4" H x 11-1⁄2" W x 4" D (285 x 290 x 100 mm)


Cut Sheet	Instructions	Template

Mechanical Information

Volts: 115VAC
Hertz: 50/60Hz
Amps: 14.4
Watts: 1653
Motor: Brush type dual ball bearings
H/P: 1/4
Fan Type: Single Inlet Centrifgal
Air Flow: 180 CFM (306 m /h)
Heating Element: 1488 Watt Nichrome wire with auto reset circuit breaker @ 115VAC
Heat Temp: 140o F (60o C) @ 77o F (25o C) ambient room temperature

Operation

Dryer is activated by user placing hands under sensor.
Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Installation

Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate.
For masonry walls use expansion bolts or anchors for 1/4" (6mm) screws. Electrical service is supplied and connected (by others) prior to installing cover.
Cover is secured to back plate with two (2) hex socket security screws (supplied).
For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of dryer is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) max.
AFF if clear floor forward reach access is only provided.
For general utility install unit so that bottom edge of dryer is 45" to 50" (1143mm to 1270mm) AFF.
For two or more dryers, dryers should be no closer than 24" (610mm) on center.

Parts

A0021 Cover
A0012 Cable camp
A0004 Motor
A0005 Rubber gromet - Motor
A0006 Motor bracket
A0007 Nylon washer - Motor
A0009 Circuit Board Module replacement
A0022 Barrier Plate
A0036 Sensor Module
A0023 Security hex screw with lock washer
A0011 Grounding screw with cup washer
A0024 Power Transistor
A0024 Blower housing - LH
A0013 Thermostat
A0015 Blower wheel
A0017Blower housing - RH
A0018 Security hex wrench
A0025 Wire harness
A0001 Rubber grommet
A0028 Metal Washer
A0029 Nylon bushing
A0034 Access hole plug
A0035 Rating label
A0030 Circuit diagram label

Video Review of ASI 0165 115VAC Hand Dryer

Video Detail Page

Questions and Answers

There are currently no questions or answers.

(Required, used to email you once question is answered.)

Customers who bought this item also bought:

ASI 0165 240

ASI 0165 240VAC Hand Dryer

ASI surface mounted 240VAC, 15 amp, 1800 watt sensor hand dryer with cast aluminum cover with porcelain enamel finish.

Price: $472.25

More Info

ASI 0600-2436

ASI 0600-2436 24" x 36" Stainless Steel Inter-Lok Angle Frame Plate Glass Mirror

24" x 36" Stainless Steel Inter-Lok Angle Frame Mirror, Plate Glass Reflective Surface, Frame: 3/4" x 5/8" roll formed 18 gauge type 304 satin stainless steel

Price: $118.42

More Info