Dedicated Micros DMI-PICHYD312LN

Model: PICHYD312LN

Specifications:

• Resolution: 480 TVL (H) x 400 TVL (V)
• Image Sensor: 1/3" DSP Digital Image Sensor
• Video Processing: DSP Technology
• Effective Pixels: 720 (H) x 540 (V)
• Minimum Illumination: 1.0 lux; for useable picture (40% video) in DNR mode; lens at F1.2
• Video Output: 1V p-p composite video via 75O BNC Connector
• Signal to Noise Ratio: 50dB
• Auto White Balance: >50dB
• Electronic Iris: 1/50s ~ 1/100,000s On/Off
• AGC: Digital
• Gamma Correction: 0.45
• Synchronization System: Internal or line lock 0-360°
• Lens Mount and Focus: 'C' or 'CS' mount, thumbwheel adjustment
• Auto Iris / Direct Drive: DC and Video via 4 pin socket (auto control)
• Low Voltage Source: 12v DC ± 10%; 24v AC ± 15%
• Consumption: <5W including 50mA DC Lens
• Input Connector: 2-way push terminal connector on rear panel
• Camera Mount: 1/4" 20 UNC top and bottom
• Material: Cast Zinc lens mount; zintec case; V0 ABS trim
• Dimensions: (HxWxD) 4.8" x 2.0" x 2.4" (123mm x 52mm x 60mm)
• Weight: 12.3oz, shipping weight 15.9oz (0.35kg/0.45kg)
• Operation Temperature: 14° to 122°F (-10° to 50°C)
• Operating Humidity: 20% to 80% relative humidity, non condensing
• Storage Temperature: 14° to 158°F (-10° to 70°C)
• Storage Humidity: 20% to 90% relative humidity, non condensing
• Lens Type: Vari-Focal 2.8-12mm
• Aperture: F1.2-F360
• Iris Type: Direct Drive, Auto Iris
• Lens Features: IR Corrected Lens for use with IR illuminators
• Housing Material: Pressure die cast aluminum alloy
• Housing Finish: Alocrom pre-treated, polyester powder coated
• Housing Weight: 4.8lbs (2.2kg)
• Housing Cable: 3m long, pre-wired coax & power cables