Altronix Cmp. EBRIDGE1CR

Altronix Cmp. EBRIDGE1CR Ethernet Over Coax Receiver Module, Supports Ip Video/Data Up To 1,500 Ft

• eBridge IP over Coax ReceiverUnspsc Code 32121705
• sloc(TM) Compliant:
• Incorporates *sloc(TM) (Security Link over Coax) technology.
• * sloc(TM) is a registered trademark of Intersil Corporation.
• Input:
• 12VDC to 24VDC Class 2 power supply (polarity not observed) or 16VAC to 24VAC Class 2 plug-in transformer.
• Power Consumption:
• 12VDC/275mA, 24VDC/110mA,
• 16VAC/375mA, 24VAC/200mA.
• Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT-5 or better structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at distances up to 1500 ft. With proper headend equipment, multiple Megapixel cameras can be used.
• Coax:
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
• LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
• Green LED - Power.
• Environmental:
• Operating Temperature: 14° F to 122° F (-10° C to +50° C).
• Storage Temperature:
• -22° to 158° F (-30° to +70° C) Storage.
• Humidity: 20 to 85%, non-condensing.
• Electrical:
• BTU/Hr.:
• -VDC: 1.69 - 4.46 BTU/Hr.
• -VAC: 2.46 - 3.07 BTU/Hr.
• Accessories:
• Composite video cable (included) - enables simultaneous composite video signal over the same Coax.
• Power connector.
• Lifetime Warranty
• UL listed for Information Technology Equipment (UL 60950-1) CUL Listed for Information Technology Equipment (UL 60950-1) CE Approved C-TICK Compliant (Z1409)
• Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc. Enables simultaneous transmission of composite and digital IP video.
• The eBridge1CR - IP over Coax receiver is designed for use with eBridge1CT to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended to 2,000' (over five times the 100m/328' Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously.