Altronix Cmp. EBRIDGE16CR

Altronix Cmp. EBRIDGE16CR 16-Port Ethernet Over Coax Receiver, Ethernet Dis 328 Ft Coax Dis. 1500Ft

• eBridge Sixteen (16) Port IP over Coax receiverCapacity: 1 CHANNEL
• Device Type: SINGLE CAMERA
• Unspsc Code 46151600
• sloc(TM) Compliant:
• Incorporates *sloc(TM) (Security Link over Coax) technology.
• Input:
• 24VDC to 56VDC UL Listed Class 2 power supply (polarity not observed) or UL Listed 24VAC Class 2 plug-in transformer.
• Power Consumption:
• 24VDC/1500mA, 56VDC/700mA,
• 24VAC/2200mA.
• Ethernet:
• Sixteen (16) RJ45 ethernet channels.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or higher structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Coax:
• Sixteen (16) BNC input channels.
• Sixteen (16) BNC composite video output channels.
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
• LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
• Green LED - Power.
• Environmental:
• Operating Temperature:
• 14° F to 122° F (-10° C to +50° C).
• Storage Temperature:
• -22° to 158° F (-30° to +70° C) Storage.
• Humidity: 20 to 85%, non-condensing.
• Electrical:
• BTU/Hr.:
• - 24VDC: 18.43 BTU/Hr.
• - 56VDC: 20.06 BTU/Hr.
• - 24VAC: 27.02 BTU/Hr.
• Lifetime Warranty
• UL listed for Information Technology Equipment (UL 60950-1) CUL Listed for Information Technology Equipment (UL 60950-1) CE Approved C-TICK Compliant (Z1409)
• Retrofit digital IP cameras in an analog CCTV installation. Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. Extend Network link distance in an industrial environment. Upgrade deployed CCTV Coax to a digital network for Retail, Casinos, Airports, Schools, Hospitals, etc. Enables simultaneous transmission of composite and digital IP video
• The eBridge16CR is a 16 channel ethernet over coax rack mount receiver. The eBridge16CR enables fast 10/100Base-T Ethernet digital communication to be transmitted over coax cable. This unit is designed to be used with eBridge1CT transceivers. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition the use of coax enables data transmission to be extended over 1500' (over four times the 100m/328 ft Ethernet maximum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.