ASI 0620-E-1232

ASI 0620-E-1232 12" x 32" Stainless Steel Channel Frame Plexiglass Mirror

× This image is for a similar product but it will differ in size, color and/or other attributes.

Quote Only Item

This item must be quoted prior to order. Please Contact Us for further details.

Sales

Technical Support

Product Description:


ASI 0620-E-1232 12" x 32" Stainless Steel Channel Frame Plexiglass Mirror

Stainless Steel Channel Frame Plexiglass Mirror Width: 12" Height: 32" Reflective Surface: Plexiglass - Shall be 1/4" (6mm) thick acrylic plastic, lightweight and highly shock resistant Image Quality: Very Good Frame Type: Channel Frame Material: ½” x ½” x ½” (13 x 13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel is a one piece roll formed member that encases mirror and backing revealing a tight mitered corner Mirror is installed on two wall brackets and held secure by theft resistant screw	Tech Sheet Maintanance

Installation

Install “H” wall brackets level and plumb per diagram location using ONLY No.8 or No.10 Pan Head screws (by others). Hang mirror on brackets and tighten locking screw (No.6-32F x 3/4" Philips Pan Head, supplied separately taped to mirror back) at bottom (note: this screw should be started prior to hanging mirror on wall bracket). For compliance with ADA Accessibility Guidelines, bottom edge of reflecting surface should be no higher than 40" (1016mm) above finished floor.

Questions and Answers

There are currently no questions or answers.

(Required, used to email you once question is answered.)