How to Order 7400 Series |
Example |
Size |
Adjustable 3–6 |
|
7436 |
Adjustable 1–4 |
|
7414 |
Application |
No designation |
- Regular mount |
7414 AR |
P |
- Regular, top jamb, and parallel mount |
7414 ARP |
J |
- Top jamb mount |
7436 ARJ |
Body Option |
DA |
- Adjustable delayed action |
7436 DA |
COV |
- Slim plastic cover |
7436 COV |
FC |
- Full plastic cover |
7414 FC |
Arm |
AR |
- Round form non-hold open (regular mount) |
7414 AR |
ARJ |
- Round form non-hold open (top jamb mount) |
7414 ARJ |
ARP |
- Round form non-hold open (parallel arm mount) |
7436 ARP |
FH |
- Friction hold open (regular mount) |
7414 FH |
FHJ |
- Friction hold open (top jamb 4" to 8" reveal) |
7436 FHJ |
FHP |
- Friction hold open (parallel arm) |
7414 FHP |
IS |
- Integra stop arm (regular mount) |
7414 IS |
S-IS |
- Spring assist integra stop arm (regular mount) |
7414 S-IS |
S-ISH |
- Spring assist integra stop arm hold open |
7414 S-ISH |
ISJ |
- Integra stop arm arm (top jamb 4" to 8" reveal) |
7414 ISJ |
S-ISJ |
- Spring assist integra stop arm (top jamb 3-1/2" to 6-1/2" reveal) |
7414 S-ISJ |
S-ISJH |
- Spring assist integra stop arm hold open (top jamb 3-1/2" to 6-1/2" reveal) |
7414 S-ISJH |
SPA |
- Super parallel arm |
7436 SPA |
SPAT |
- Super parallel arm, thumb turn hold open |
7436 SPAT |
SPAK |
- Super parallel arm, hex key turn hold open |
7436 SPAK |
DS |
- Door saver parallel arm |
7436 DS |
S-DS |
- Spring assist door saver parallel arm |
7436 S-DS |
DST |
- Door saver parallel arm, thumb turn hold open |
7436 DST |
S-DST |
- Spring assist door saver parallel arm, thumb turn hold open |
7436 S-DST |
DSK |
- Spring assist door saver parallel arm, thumb turn hold open |
7436 DSK |
T |
- Slide track arm T, JT, and FT applications |
7436 T |
TH |
- Slide track arm T, JT, and FT applications with hold open |
7436 TH |
PT86 |
- Stop mounted slide track arm |
7436 PT86 |
PT86H |
- Stop mounted slide track arm with hold open |
7436 PT86H |
TDE |
- Jamb mounted slide track arm, double egress (specify hand) |
7436 TDE LH |
TDEH |
- Jamb mounted slide track arm, double egress with hold open (specify hand) |
7436 TDEH LH |
Accessories |
|
- Specify the number of the accessory. |
7414 x DP74 |
Fastener Packs |
SNB1 |
- Sex nuts (see information on page 16) |
7436 SNB1 |
DPK86 |
- Self-drilling screw pack for steel doors and frames |
7436 DPK86 |
TPK86 |
- Self-tapping screw pack for aluminum doors and frames |
7436 TPK86 |
TX86 |
- Tamper-resistant TORX screws |
7436 TX86 |
Finish |
See DORMA finish information in this brochure. Example: 689 = Aluminum |
7436 689 |
Accessories |
Round Form Arm (8 mm rod) |
Round Form Arm (10 mm rod) |
Narrow Profile Arm (8 mm) |
Narrow Profile Arm (10 mm) |
|
|
|
|
AR — Complete Arm Assembly
(0"–4" [0 mm–102 mm]
reveal) with 8 mm rod. Arm is
non-handed. |
ARJ — Complete Arm Assembly
(4"–8" [102 mm–203 mm]
reveal) with 10 mm rod.
Designed specifically for top
jamb applications with deeper
reveals. Arm is non-handed. |
ARNP — Complete arm
assembly. Regular or top
jamb mount. Permits
installation on 1" (25 mm)
frame face for regular mount
with maximum pull-side
reveal of 1/8" (3 mm). Can
also be used top jamb
(0"–4" [0mm–102 mm]
reveal) for narrow top door
rails. Arm is non-handed. |
ARNPJ — Complete arm
assembly for top jamb installations
(4"–8" [102 mm–203
mm] reveal) for narrow top
door rails. Arm is non-handed. |
ARP — Parallel round form
arm complete (Tri-Pack)
(0"–4" [0 mm–102 mm]
reveal). P86 included. |
AMR48 — Regular non-hold
open main arm and adjusting
arm. Accepts 10 mm rod. |
ARNPP — Complete arm
assembly for parallel arm
mount (Tri-Pack). (0"–4"
[0 mm–102 mm] reveal).
P86 included. |
AMR48NP — Narrow profile
main arm and adjusting arm.
Used in conjunction with
SR48 shoe and rod. Uses 10
mm rod. |
AMR04 — Regular non-hold
open main arm and adjusting
arm. Accepts 8 mm rod. |
|
AMR04NP — Narrow profile
main arm and adjusting arm.
Used in conjunction with
SR04 shoe and rod. Uses 8
mm rod. |
|
Regular Arm Shoe and Rod |
Friction Hold Open Arm |
Integra Stop Arm |
Spring Integra Stop Arm |
|
|
|
|
Heavy-duty parallel arm. Available in non-hold open,
thumb turn hold open, and
hex key turn hold open. Units
can be installed for maximum
opening of 100° or 180°.
Hold open units will hold
open at 90° or 125°. Maximum
opening is 180° (conditions
permitting). Arm isnonhanded.
Non-hold open arm
illustrated. |
Heavy-duty parallel arm with
integral cushioned opening
function. Available in non-hold
open, thumb turn hold open,
and hex key turn hold open.
Units can be installed to
achieve either stop or stop and
hold open at 85°, 90°, 100°,
and 110°. Maximum opening
is 110° (conditions permitting).
Arm is non-handed.
Non-hold open arm illustrated. |
Heavy-duty parallel arm with
spring assisted dead stop
function. Available in nonhold
open and thumb turn
hold open. Units can be
installed to achieve either
stop at 85°, 90°, 100°, and
110° or stop and hold open
function. Maximum opening
is 110° (conditions permitting).
Arm is non-handed.
Non-hold open arm illustrated. |
Provides slide track function for
improved aesthetics and vandal
resistance. Units can be
installed to provide 85°, 90°,
110°, or 180° of door opening
(conditions and application
permitting). Arm is non-handed.
T — Track arm complete. Can be
used on pull-side T applications
(closer on door, track on frame)
and JT applications (track on
frame, closer on door). Can also
be used with FT flush transom applications (closer on transom,
track on door). |
SPA — Super parallel arm
non-hold open. |
DS — Door saver arm nonhold
open. |
S-DS — Spring assist door
saver arm. |
T — Track arm complete. Can be
used on pull-side T applications
(closer on door, track on frame)
and JT applications (track on
frame, closer on door). Can also
be used with FT flush transom
applications (closer on transom,
track on door). |
SPAT — Super parallel arm
thumb turn hold open. |
DST — Door saver arm thumb
turn hold open. |
S-DST — Spring assist door
saver arm thumb turn hold
open. |
TH — Track hold open arm
complete. Can be used in same
applications as T arm. Range of
hold open and maximum opening
varies with mounting application. |
SPAK — Super parallel arm
hex key turn hold open. |
DSK — Door saver arm hex
key turn hold open. |
|
|
|
BUMPERDS — Door saver
bumper. |
|
|
Super Parallel Arm |
Door Saver Arm |
Spring Door Saver Arm |
Track Arm |
|
|
|
|
Heavy-duty parallel arm.
Available in non-hold open,
thumb turn hold open, and
hex key turn hold open. Units
can be installed for maximum
opening of 100° or 180°.
Hold open units will hold
open at 90° or 125°. Maximum
opening is 180° (conditions
permitting). Arm is nonhanded.
Non-hold open arm
illustrated. |
Heavy-duty parallel arm with
integral cushioned opening
function. Available in non-hold
open, thumb turn hold open,
and hex key turn hold open.
Units can be installed to
achieve either stop or stop and
hold open at 85°,90°, 100°,
and 110°. Maximum opening
is 110° (conditions permitting).
Arm is non-handed.
Non-hold open arm illustrated. |
Heavy-duty parallel arm with
spring assisted dead stop
function. Available in nonhold
open and thumb turn
hold open. Units can be
installed to achieve either
stop at 85°, 90°, 100°, and
110° or stop and hold open
function. Maximum opening
is 110° (conditions permitting).
Arm is non-handed.
Non-hold open arm illustrated |
Provides slide track function for
improved aesthetics and vandal
resistance. Units can be
installed to provide 85°, 90°,
110°, or 180° of door opening
(conditions and application
permitting). Arm is non-handed. |
SPA — Super parallel arm
non-hold open. |
DS — Door saver arm nonhold
open. |
S-DS — Spring assist door
saver arm. |
T — Track arm complete. Can be
used on pull-side T applications
(closer on door, track on frame)
and JT applications (track on
frame, closer on door). Can also
be used with FT flush transom
applications (closer on transom,
track on door). |
SPAT — Super parallel arm
thumb turn hold open. |
DST — Door saver arm thumb
turn hold open. |
S-DST — Spring assist door
saver arm thumb turn hold
open. |
TH — Track hold open arm
complete. Can be used in same
applications as T arm. Range of
hold open and maximum opening
varies with mounting application. |
SPAK — Super parallel arm
hex key turn hold open. |
DSK — Door saver arm hex
key turn hold open. |
|
|
|
BUMPERDS — Door saver
bumper. |
|
|
TDE Track Arm |
Push Side Track Arm |
Sex Nuts |
|
|
|
Provides slide track function
for pull-side reveal conditions
up to 3-1/2". Provides 117°
of door opening (conditions
permitting). Arm is handed.
Also available with hold open
option to provide selective
single point hold open between 30° and 110°. |
Arm requires a minimum 3-
3/4" clearance between door
face and wall when opened
90° and greater. |
PT86 — Push-side track arm
complete. Used with PT
track applications (closer on
door,track on soffit). |
SNB1 — Sex nuts with machine
screws for 1-3/4" (44 mm) door. |
TDE — Double egress track
arm complete. |
PT86H — Push-side track
hold open arm complete.
Used with PT track applications
(closer on door, track on
soffit). |
SNB2 — Sex nuts with machine
screws for 1-3/8" (35 mm) door.
Required for use on unreinforced
doors and wood or
composite labeled fire doors for
securely attaching hardware to
the door. |
TDEH — Double egress hold
open track arm complete. |
|
Backplate |
Backplate |
Backplate |
Backplate |
|
|
|
|
BP74 — For top jamb mount
when overhead ceiling clearance
is less than 2-1/4" (57
mm). Can also be used for
regular mount to clear a
mortised overhead stop/holder. |
BP86 — For top jamb mount
with slim plastic cover when
overhead ceiling clearance is
less than 2-1/4" (57 mm).
Can also be used for regular
mount to clear a mortised
overhead stop/holder. |
BP86FC — For top jamb
mount with full plastic cover
when overhead ceiling clearance
is less than 2-1/4" (57
mm). Can also be used for
regular mount to clear a
mortised overhead stop/holder. |
BP74T — For use with pullside
track applications (closer
on frame face, track on door)
to permit installation on a
standard 2" (51 mm) frame
face. |