Color/Appearance: Red alder tends to be a light tan to reddish brown; color darkens and reddens with age. There is no visible distinction between heartwood and sapwood. Large aggregate rays appear as occasional small streaks on the face grain that can be mistaken for defects in the wood. Grain/Texture: Grain is generally straight, with a moderately fine, uniform texture. Rot Resistance: Red alder is rated non-durable to perishable regarding decay resistance, and freshly cut logs should be quickly converted into lumber and dried to prevent staining or decay in the wood. Workability: Red alder is very easy to work with both hand and machine tools; it sands especially easy. The wood is rather soft, however, and care must be taken to avoid denting it in some applications. Turns, glues, and finishes well. Odor: No characteristic odor. Allergies/Toxicity: Although severe reactions are quite uncommon, alder in the Alnus genushas been reported to cause eye, skin, and respiratory irritation. See the articles Wood Allergies and Toxicityand Wood Dust Safetyfor more information. Pricing/Availability: Red alder is usually sold in two different grades: knotty and clear. Knotty red alder is usually inexpensive, on par with other domestic utility woods. Clear red alder is more expensive, closer to other domestic cabinet hardwoods. Sustainability: This wood species is not listed in the CITES Appendices, and is reported by the IUCN as being a species of least concern. Common Uses: Veneer, plywood, furniture, cabinetry, millwork, pallets, musical instruments (electric guitar bodies), and chip/pulp wood. Comments: Red alder is the most abundant hardwood in the Pacific Northwest region of the United States, and is a commercially important lumber. The wood has good stability with little movement in service once fully dried. |