Q: Need to confirm that the 973 model is rated for Div. 1, class 2, and what is my cost & the lead time on this
A: The short answer is no. The Rixson 973 is not Class II, Division 1 compliant* and unfortunately the only magnet that we have that is compliant to this is the 991 and it is a totally different function which can be reviewed here:
Click Here
Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise which is based on several generations of one family with over 8 - decades of experience (something Amazon or eBay can not provide) as we know it separates us from our competition, so don't hesitate to ask.
Please reply to this email or contact our sales department here:
Click Here
if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with. If this answer was helpful -
please consider following us on Twitter
Click Here
or liking our page on Facebook
Click Here
Thank you for your consideration.
* Class II, Division 1: One of the following three situations must exist in order for an area to be considered a Class II, Division 1 location:
Where combustible dust is present in the air under normal operating conditions in such a quantity as to produce explosive or ignitable mixtures. This could be on a continuous, intermittent or periodic basis.
Where an ignitable and/or explosive mixture could be produced if a mechanical failure or abnormal machinery operation occurs.
Where electrically conductive dusts in hazardous concentrations are present.