 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
Rixson 297210-1Arm |
Rixson 297210-1Arm Assembly
|
| |
| Manufacturer: Rixson |
| Price: $161.04
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
|
|
297210-1 arm assembly
for 2900 Low Energy Automatic Door Openers |
|
|
|
|
Introduction
When exterior wind pressures or security issues arise and a floor closer is the best way to close a door but lighter opening forces are desired, the Rixson® 2900 Automatic Opener is the perfect solution. Low energy operators are not designed for high traffic or heavy doors because the mechanical closings inside are not strong enough to control the door. By using a Rixson heavy-duty floor closer (existing or new installation) along with a Rixson 2900 door opener, there is no need for the extra expense of a high energy operator.
•The 2900 series is a combination overhead operator, combined with a Rixson 27, or 28 floor closer. It is not meant to be used with anything else, as the door would not close otherwise. If it is an overhead opener/ closer you seek, We suggest contacting Norton Door Controls.There is no special templating for either the floor closer or the operator. |
| |
Specifications
Heavyweight high-traffic doors that require automatic opening shall use the low energy operator in conjunction with a heavy-duty floor closer. Operator shall be for opening of door only. Door shall be installed in the floor and shall have separate
and independent closing speeds with back check turned to lightest setting. Door controls (interior/exterior) for swinging doors shall be low energy operators. Door closing force shall be adjustable to ensure adequate closing control. Door operator shall have an adjustable backcheck feature to cushion the door opening speed if opened violently. Low energy operation to cycle the
door open as controlled by the body/pump and motor assembly adjustments. Power operator unit shall provide
conventional door closer opening and closing forces unless the power operator motor is activated by an initiating device. Motor assist shall be adjustable from 0 to 30 seconds in 5 second increments. Motor assist shall restart the time cyclem with each activation of the initiating device. Unit shall have a three-position selector mode switch that shall permit unit to be switched “ON” to monitor for function activation, switched to “H/O” for indefinite hold open function or switched to “OFF,” which shall deactivate all control functions but will allow standard door operation by means of the internal mechanical closer. Door control shall be adjustable to provide compliance with the requirements of the Americans with Disabilities Act (ADA) and ANSI standards A117.1 and A156.19. |
|
|
Customer Reviews
There are no customer reviews yet.
|
|
|