Pemko CFS120CP

Full Surface Center Pivot Standard Duty 120" Clear Anodized Aluminum Continuous Hinge

• Length: 120"
• Color: Clear Anodized Aluminum.
• Designed for mainly for retrofit work, and are applied to the exposed surface of the door and frame.
• Center pivot units easily replace butt hinges since no door or frame adjustments are necessary. Also, center pivot hinges are more versalite with restricted frame faces.
• Frame Portion
  • All fasteners are #1/4-20 x 5/8", Torx Head Self Tapping Screws (Tip No. T-27).
    • Standard duty hinges - 4 required for each leaf.
• Frame Leaf Snap Cover Portion
  • All fasteners are No. 12/24 x 3/4", FH Self Drilling/ Tapping Screwa with special washer.
    • Standard Duty Hinges - 6 required.
• Door Portion
  • Thru-bolt-1/4-20 x 1-5/8"
    • Standard Duty Hinges - 4 required.
  • Shoulder Bolt - 1/4-20 x 1" PCH
    • Standard Duty Hinges - 4 required.
  • Pan Head Self Drilling No. 12 x 3/4".
    • Standard Duty Hinges - 6 required.

Template	Drawing

• New Construction
  • New door and frame.
• Renovation
  • New door and frame
  • New door with existing frame.
  • Existing door with new frame.
  • Existing door with existing frame.
  • Where pivot point must be centered between the door and frame.
  • Where frame face is greater than 1-1/4".
• Pemko hinge has increased critical stress points of the leaf extrusions, which provides additional strength and rigidity to the completed product.
• Pemko hinge maintains uniform bearing spacing the full length of the hinge even when lengths exceed 8'-9".
• Commercial models are ideal for use on lead lined doors, without requiring special screw locations.
• Full length channel cap creates clean lines and provides security, safety and privacy.