|
| |
|
|
KS 12GD |
Karpen Steel 12 Gauge Door
|
| |
| Manufacturer: Karpen Steel |
| Price: $0.00
|
| |
|
| |
|
| |
| |
| |
|
|
| Quote Only Item |
 | This item must be quoted prior to order. Please Contact Us for further details. |
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
 |
12-Gauge Door |
|
| Material |
|
12-gauge face sheets of HRPO or
A60 Galvannealed Steel |
| Thickness |
|
Actual Door Thickness: 1 7/8" |
|
1 3/4" Door Thickness available (Special - upcharge) |
| Size Limitations |
|
Largest single door: 3'-8" x 10'-0" |
|
Also Available: 4'-0" x 7'-2" |
|
Largest pair: 7'-2" x 10'-0" |
|
Also Available: 8'-0" x 7'-2" |
| Core |
|
Doors shall have continuous vertical interlocking steel stiffeners of 20-gauge and shall be spaced no further than 8" on center. Doors shall be filled with mineral rock wool. |
| Hinge Backset |
|
5/16"standard. |
| Finish |
|
Doors shall be thoroughly cleaned after assembly and given a prime coat of rust inhibiting paint. The primer shall be air dried. Low gloss oil base trim paints (max gloss 25) are recommended as a finish paint. |
|
|
| Undercut |
|
3/4" standard. Other undercuts as specified. |
| Edge Construction |
|
Square both sides |
| Reinforcements |
|
Top and bottom of doors shall be reinforced with continuous 16 gauge steel channels, welded to both sides of doors. |
|
Hinge Reinforcements shall be 11-gauge steel angle, 12" long. |
|
Cylindrical lock reinforcement shall be 16-gauge with 11-gauge thread depth. |
|
Other lock and closer reinforcements shall be 12-gauge. |
|
Doors shall be reinforced for all surface type hardware. Drilled and tapping of surface hardware to be done in the field by the erector. |
|
Edges of the door shall be continuously center-seam welded, ground, and filled to ensure a smooth finish. |
|
| |
|
|
Customer Reviews
There are no customer reviews yet.
|