|
|
|
| |
|
|
Falcon MLSKDC |
Falcon M-Series Mortise Lock Keyed Double Cylinder
|
| |
| Manufacturer: Falcon |
| Price: $523.12
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
How to Order |
|
For correct ordering, and to ensure no delays in shipment of
your order, the following descriptive data must be listed in the
sequence shown. Necessary information can be found in other
parts of this catalog.The example below shows an order for 16
each LM locksets in the 521Entry function, DG (Dane-Gala)
trim design in a 626 (satin chrome) finish, 8 RH (right hand)
and 8 LH (left hand) to accommodate doors 1-3/4" thick with
AA1-AA16 keying.
Interchangable cores are supplied as core only, uncombinated and less all parts.
 |
Quantity: |
Indicate the quantity required. |
|
Catalog Number: |
Select catalog number. |
|
Trim Design: |
Indicate letter of knob or lever design followed by
letter of rose or escutcheon design. |
|
Example: |
DG-D for Dane lever followed by G for Gala rose. |
|
Finish: |
When the finish is the same for the outside and inside
trim, it is shown once (626). For split finishes, the outside is
designated first, then the inside (626 x 625). |
|
Latch: |
Two-piece mechanical anti-friction standard. All catalog
numbers shown in this catalog indicate 2-3/4" backset. |
|
Strike: |
4-7/8" x 1-1/4" x 1-5/16" lip-to-center with curved lip
standard. Optional flat lip strike 1-1/8" L-T-C or strikes with
shorter or longer lip lengths are available. |
|
Cylinder Type: |
For 6-pin, add 6-pin. For 7-pin, add 7-pin. |
|
Door Hand: |
See chart . |
|
Keying Detail: |
We suggest using the standard terms developed
by the A.H.C. (Architectural Hardware Consultants).
EXAMPLE: AA1 - Grand Master keyed, Master keyed, change
key 1. |
|
Interchangeable Core: |
To order product capable of accepting
an interchangeable core, add “FIC”( for interchangeable core).
To order product with an interchangeable core, add “WIC”
(with interchangeable core). |
|
Keyway: “G” |
is standard on regular cylinders, “A” is standard on
interchangeable cores. Other keyways available. See price book. |
|
Additional Keys: |
Note the total number of keys required. |
|
Large Bow Keys: |
Add - “with large bow keys.” |
|
| Catalog
Number |
Function |
Description |
ANSI No. & Grade |
| LM371 |
|
Store Door Lock |
F14-1 |
| Latch bolt by knobs/levers. Dead bolt by key from either side. |
F14-2 |
| LM381 |
|
Privacy Lock |
F09-1 |
| Latch bolt by knobs/levers, dead bolt by turn inside or emergency key (012727-000-30) outside furnished with lock. |
F09-2 |
| Finishes |
| Although we apply the finest available protective plating
and/or enamel coating to the surface of our products, these
finishes have limitations and in time may deteriorate either
from exposure to weather, pollution, perspiration, extremes of
climate, frequency of use or other factors. Deterioration of
these finishes is, therefore, not a defect, but a normal process
which is unavoidable. Falcon Lock cannot accept responsibility for finish deterioration in these circumstances; therefore,
the finishes cannot be guaranteed. These products will not be
refinished or replaced under our warranty should deterioration
of finishes occur. Some finishes are not suggested for areas
which are subject to corrosive climate or chemical conditions.
We recommend chrome plated or stainless steel finishes for
these areas. |
| Description |
ANSI No. |
Available on |
Bright Brass |
605 |
All Trim |
Satin Brass |
606 |
All Trim |
Satin Bronze |
612 |
All Trim |
Satin Bronze Oil Rubbed |
613 |
All Trim |
Bright Chrome |
625 |
All Trim |
Satin Chrome |
626 |
All Trim |
Satin Stainless Steel |
630 |
DG, KG |
Falcon M Series Double-Keyed Levers
|
| Full M-Series Falcon catalog |
|
|
| Door thickness: |
Standard accommodates thickness of 1-3/4"
to 2-1/4". |
| Backset: |
2-3/4" only. |
| Case: |
Cold formed steel, zinc dichromate plated, .090" thick.
Optional lead wrapping available. |
| Hubs: |
Hardened steel. |
| Handing: |
Right hand is standard; left hand optional. Reversible in
the field. |
| Cylinders: |
Solid brass cylinder and plug. 5, 6 or 7-pin are available
on standard cylinders. 6 or 7-pin are available on interchangeable
core cylinder. Furnished with two nickel silver keys standard. |
| Keyways: |
“G” keyway standard on standard cylinder. “A” keyway
standard on I/C cylinder. See price book for optional keyways. |
| Bind Resistant Trim: |
Heavy-duty through-bolted inserts clamp the
trim on the door assuring proper alignment. Designed to bottom
out on 1-3/4" doors to prevent door collapse. Provided with
10-32 screws for strength and thread sealant to prevent loosening. |
| Latch Bolt: |
Two-piece brass, mechanical anti-friction bolt. 3/4"
projection. Optional lead wrapping available. |
| Dead Bolt: |
1" throw, brass with a 1/4" thick hardened steel, freeturning,
saw-resistant roller. |
| Faceplates: |
(Armored Front) 1-1/4" x 8" brass, bronze and stainless
steel adjustable for door bevel. Reinforced by heavy gauge steel
with stabilizing ribs. |
| Strike: |
Brass, bronze or stainless steel. Meets ANSI AII5.1 for frame
preparation. Strike is handed. Optional 1-1/8 lip-to-center
reversible flat lip available. |
| Electrified Functions: |
Available in 12 or 24 VAC or VDC. |
| ANSI/BHMA: |
Meets ANSI/BHMA 156.13, Series 1000. |
| UL: |
3 hour A label. |
|
|
| Falcon Mortise Lock Specifications |
|
Mortise locksets shall meet Grade 1 operational requirements
ANSI/BHMA A156.13, Series 1000. |
 |
|
All mortise locks shall be UL listed (3 hour A Label). |
|
Lockset cases shall be of cold rolled formed steel .090" thick.
All steel interior parts and case shall be double treated with
zinc plating and chromate conversion coating to resist rust. |
|
Dead bolts shall be 1" projection with two hardened steel
rollers. Latch bolts shall be 3/4" projection, two piece metal
anti-friction type. |
|
Lock cases shall be interchangeable for either knobs or lever
applications without changing parts or modifying chassis in
any way. |
|
On functions where “stopworks“ feature is required, the
changing of the outside trim from locked to unlocked and
vice-versa, must be performed via buttons located in the
face of the mortise case armor front plate. |
|
Where required, trim is to be interchangeable and compatible
so that both rose and escutcheon trim can be furnished on the
same lock/latchset. |
|
Trim shall be through-bolted with (2) 10–32 screws coated
with thread sealant to provide strength and resistance to
loosening. Inner and outer trim shall “bottom-out“ on
1-3/4" doors to prevent door collapse. |
|
All lever trim shall have individual heavy-duty springs behind
the rose (escutcheon) for lever return and to prevent lever
sag. All lever trim shall be cast, forged or wrought. |
|
Spindles for lever trim shall be individual half-spindles on each
side, spring actuated to prevent binding and designed to shear
at 600+-20 inch lbs. to prevent damage to lock chassis. |
DOOR TEMPLATE by Function |
M371, M381, M411, M431, M441, M811, M821 |
Store Door Lock, Privacy Lock |
|
|
| Heavy Duty Lever Trim |
| Cast or forged levers (Avalon, Dane and Quantum) and wrought brass, bronze or stainless levers (Kim and Sutro), wrought
rose and wrought escutcheons are standard. Sutro is a solid lever, Kim is hollow. Other lever designs and finishes are aviable on special order. For more information call: 1-877-631-9411. |
| |
|
Avalon |
Levers Dane |
Kim |
Quantum |
Sutro |
Rose |
Gala |
AG |
DG |
KG |
QG |
SG |
Escutcheon |
Napa |
AN |
DN |
KN |
QN |
SN |
|
Questions and Answers
Q: When was the Falcon M lock discontinued? A: The Falcon M series was discontinued 3/31/10 and was replaced by the Falcon MA series. Q: What are the key height and spacing for Falcon standard and restricted keys and cylinders? A: Falcon Standard Bitting Specs - 018 system can be seen here: Download File
Falcon Restricted Bitting Specs - 025 system can be seen here: Download File Q: What is the part number for the lever return spring for the old M series mortise lock? A: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Please note that this return spring is for the old Falcon M mortise lock not the current Falcon MA mortise lock. The figure below shows the exploded view of the M lock lever trim. The return spring (circled in red) is a commonly requested part, part number is 030057-002-30 as seen here: View Image
(Required, used to email you once question is answered.)
Customer Reviews
There are no customer reviews yet.
|
|
|