For correct ordering, and to ensure no delays in shipment of your order, the following descriptive data must be listed in the sequence shown. Necessary information can be found in other parts of this catalog.The example below shows an order for 16 each LM locksets in the 521Entry function, DG (Dane-Gala) trim design in a 626 (satin chrome) finish, 8 RH (right hand) and 8 LH (left hand) to accommodate doors 1-3/4" thick with AA1-AA16 keying.

	Quantity:	Indicate the quantity required.
	Catalog Number:	Select catalog number.
	Trim Design:	Indicate letter of knob or lever design followed by letter of rose or escutcheon design.
	Example:	DG-D for Dane lever followed by G for Gala rose.
	Finish:	When the finish is the same for the outside and inside trim, it is shown once (626). For split finishes, the outside is designated first, then the inside (626 x 625).
	Latch:	Two-piece mechanical anti-friction standard. All catalog numbers shown in this catalog indicate 2-3/4" backset.
	Strike:	4-7/8" x 1-1/4" x 1-5/16" lip-to-center with curved lip standard. Optional flat lip strike 1-1/8" L-T-C or strikes with shorter or longer lip lengths are available.
	Cylinder Type:	For 6-pin, add 6-pin. For 7-pin, add 7-pin.
	Door Hand:	See chart .
	Keying Detail:	We suggest using the standard terms developed by the A.H.C. (Architectural Hardware Consultants). EXAMPLE: AA1 - Grand Master keyed, Master keyed, change key 1.
	Interchangeable Core:	To order product capable of accepting an interchangeable core, add “FIC”( for interchangeable core). To order product with an interchangeable core, add “WIC” (with interchangeable core).
	Keyway: “G”	is standard on regular cylinders, “A” is standard on interchangeable cores. Other keyways available. See price book.
	Additional Keys:	Note the total number of keys required.
	Large Bow Keys:	Add - “with large bow keys.”

LM321