Features 4 channels that can be configured as 2 channels of voice and 2 of siren or all 4 channels of voice

Rated Capacity: 12 AH (20 hour rate)

Rated Capacity: 26 AH (20 hour rate)

8 channels of recordable voice or music for applications such as telephone on-hold announcements, security and access control warnings and more

Rated Capacity: 5 AH (20 hour rate)

Rated Capacity: 8 AH (20 hour rate)

Rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, "No Rust" enclosure

Smooth, paintable, "no grill" surface easily blends with any decor

20 Watt, 8 Ohm speaker in an attractive surface mount plastic enclosure

Sound Level: 100 db at 1 meter, 13.8vdc; Current Draw: 480mA @ 13.8vdc

Provide a solid dependable splice in wires ranging from 18 to 30 gauge

Provide a solid dependable splice in wires ranging from 18 to 30 gauge

Low current draw; Positive or negative activation

Low current draw; Small, compact size

Packaged as multiple relay modules grouped on a pre-scored break-off circuit board

Operates on 12 or 24 volts DC; Can be triggered with negative or positive input of only 1 milliamp

Operates on 12 or 24 volts DC; Can be triggered with negative or positive input of only 1 milliamp

1 to 60 seconds or 1 to 60 minutes time settings

1/2" x 1-1/2" x 1/4" thick each

Analyzes 12 volt rechargeable batteries

Elk-12260 Lead Acid 12V-26.0Ah Battery

Elk-124 Recordable Annunciator,W/Enclo 8 Min, 8 Channels

Elk-71 Siren,Interior Self-Contained(

Elk-9002 B Connectors (Plain),Yellow,50

Elk-9022 B Connectors (Gel),White,500/P

Elk-912B Relay,Spdt,12/24V,Big Terminal

Elk-912B6 Relay,Spdt,12/24V,Big Terminal

Elk-924 Relay,Sensitive1Ma Trigr,Dpdt

Elk-9244 Relay,Sensitive,1Ma Trigger Dpdt12/24V,4/Pk

Elk-960 Timer,Delay,12/24V,1 Sec - 60

Elk-P112K P112 W/ 12V,5Ah Battery

Elk-P1216 Pwrsupply,12Vdc,1.5Amp

Elk-P124K P124 W/ Two 12V,5 Ah Batteries

Elk-P624 Pwrsupply,1.2 Amp Max,6, 12, 2

Elk-Trg1640 Xfmr,16.5V,45Va,Ground,Lifetim

Elk-Trg2440 Xfmr,24V,40Va,Ground,Lifetime

Self-contained yelping siren sound

Auto reset "fuseless" overload protection

Plugs into 100 to 120 volts A.C., and supplies regulated 12 volts D.C. to a standard 2.1mm power plug

Distributes 12VDC power to three (3) sets of DC power terminals

On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages

White, general purpose, paintable box for housing wire splices, relay modules, etc

Distributes a single AC or DC input into nine individual outputs

Compatible with virtually all 12 volt control panels, including pulsing alarm outputs

Compatible with virtually all 12 volt control panels, including pulsing alarm outputs

Compatible with virtually all 12 volt control panels, including pulsing alarm outputs

Compatible with virtually all 12 volt control panels, including pulsing alarm outputs

Grounding prong and terminal; Electrical outlet mounting tab

Grounding prong and terminal; Electrical outlet mounting tab

Features a decorative snap-on trim cover with all hardware for mounting the strobe to any flat surface or directly to a single or double gang electrical box