Home   |   Welcome Guest!   |   Sign In?   |   My Account   |   Contact Us   |   Tracking   |  
Order online or call us 844-809-3667
Shopping Cart
Items in Cart: 0 Items Sub Total: $0.00 View Cart Checkout


Bobrick B-708 115V AirGuard Automatic Hand Dryer Cast Iron Cover

B-708 115V

Bobrick B-708 115V AirGuard Automatic Hand Dryer Cast Iron Cover

Manufacturer: Bobrick
Price: $1,706.45
  Order Options:  
Comments (Optional)
  Add To Cart  
Availability Information
Standard - ships in 25 business days.
Additional Declarations - Don't purchase anything Bobrick until you check out AJW
Similar Product Video
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
Email Friend
More from Bobrick
This item ships from CA.
Bobrick B-708 115V Surface-Mounted AirGuard Automatic Hand Dryer
Item # Description
B-708 115V Bobrick B-708 115V Surface-Mounted AirGuard™ Automatic Hand Dryer
Vitreous enamel, cast iron cover, white only

115V AC, 20 Amp, 2300 Watts, 50/60 Hz, or 208-240V, AC, 9-10 Amp, 1900-2300 Watts, 50/60 Hz, VDE approved and CE marked
Limited warranty: motor brushes for 3 years; all other parts for 10 years
Installation: Automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor

"Bobrick copyrighted product images are used with the permission of Bobrick Washroom Equipment, Inc."
Installation Instructions:

Wall preparation: Secure mounting base on wall using template provided. For masonry walls, provide four 1/4'' (6mm)
expansion shields or anchors and secure with #14(M6.3) sheet-metal screws (not furnished). For plaster or dry wall
construction, provide concealed backing to comply with local building codes and secure with #14 x 2-3/4'' (M6.3 x 70mm) or
longer round-head sheet-metal screws or 1/4'' (6mm) toggle bolts (not furnished). Provide electrical service from nearest
distribution panel to dryer mounting base in conformance with local electrical codes.
Wiring Instructions:
1. For 115-Volt Dryers — Connect ground wire to ground terminal marked , the black or hot wire to terminal marked L1,
and neutral or white wire to terminal marked N. A DEDICATED LINE IS REQUIRED FOR EACH 115-VOLT
2. For 208–240-Volt Dryers — Connect ground wire to ground terminal marked and the 208- or 240-volt wires to terminal
marked L1 and L2.
Notes: Bobrick automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which
may interfere with the operation of the automatic sensor.
For installation instructions that include step-by-step installation procedures and details of electrical service connections, see
Form No. 700-69, which is packed with each shipment. This form is also available in advance upon request

Cover — One-piece, minimum 1/8'' (3mm) thick, white iron-casting is finished in high-gloss, acid-resistant, multicoat
vitreous enamel. Equipped with a two-position, self-returning, chrome-plated air-outlet nozzle. Graphic operating
instructions are permanently fused with vitreous enamel cover for maximum vandal- and wear-resistance. Air-inlet and -
outlet openings are equipped with vandal-resistant grilles. Cover is secured to mounting base with two concealed, vandalresistant,
recessed hex-screws.
Mounting Base — 14-gauge (2.0mm) plated steel with four 19/64'' (8mm) diameter mounting holes.
Motor — Universal, 1/10 hp, 6200 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating
sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch.
Fan — Dynamically balanced, single-inlet centrifugal fan is mounted on motor shaft; directs airflow through heating element
at 150 cfm.
Heating Element — Coiled nickel-chrome heating element is mounted in mica frame and protected by an automatic
thermal-overload switch. Heating element, which is located on inlet side of fan, heats air without hot spots — inaccessible to
Electronic Control — Infrared sensor automatically turns dryer on when hands or self-returning nozzle are held under airoutlet
opening and across path of sensor. Remove hands or release self-returning nozzle from path of sensor and dryer
stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is
placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer
operates normally
  Architectural Builders Supply product suggestions:  
Bobrick B-731 230V AirCraft TouchButton Hair Dryer Surface-Mounted
DISCONTINUED - Bobrick recessed automatic hand dryer
Price: $0.00
Questions and Answers
There are currently no questions or answers.
(Required, used to email you once question is answered.)
Customer Reviews
There are no customer reviews yet.
Be the first to Write a Review

What's New
Corporate Members of DHI
Member of NFPA.
AAADM Certified!
ALOA Certified!
DHI FDAI EDA Inspector
Intertek Logo