 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
B-5806x24 |
Bobrick B-5806x24 24" Straight Grab Bar
|
| |
| Manufacturer: Bobrick |
| Price: $88.21
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
Bobrick B-5806x24 Extra-Heavy-Duty Grab Bar
|
|
| |
| Item # |
Description |
| B-5806x24 |
Bobrick B-5806x24 Series Concealed Mounting with Snap Flange Grab Bars |
|
Specifications: |
|
|
|
1-1/4" (32mm) diameter, 18-gauge (1.2mm) stainless steel grab bar with peened grip |
|
Stainless steel ends and flanges |
|
Concealed mounting with snap flange. |
|
Withstands 900-lb (408-kg) downward pull when properly installed. |
|
|
"Bobrick copyrighted product images are used with the permission of Bobrick Washroom Equipment, Inc." |
Installation Instructions:
|
Provide concealed anchor device or backing as specified or required in accordance with local building codes before wall is finished. Fasten concealed
mounting flanges to anchor device or backing with two screws in each flange. Snap flange covers over each mounting flange to conceal mounting screws.
Concealed anchor devices and mounting screws are not included with Bobrick grab bars and must be specified as an accessory.
For Grab Bars with an Intermediate Flange(s), Pull Snap-Flange Covers away from mounting flanges. Place grab bar in desired mounting location. Use
intermediate flange as a template to mark location of mounting screws at intermediate flange only. Mark screw locations at the center of the slot in the
middle of the double-keyhole shaped mounting holes in the intermediate flange. Remove grab bar from wall. Drive the intermediate flange mounting
screws into wall at marked locations. Note: Make sure to leave a space of just over 1/8'' (3.17mm) between the underside of the screw head and the wall.
install grab bar on the wall by placing the round ends of the intermediate flange double-keyhole shaped mounting holes over the mounting screws
are located in the middle of the flange slots. Install the mounting screws into the wall at the end flanges and secure tightly. Tighten the mounting screws
at the intermediate flange. Press all snap-flange covers into place to conceal mounting flanges.
Note: Recommend use of 1/4'' or #14 (M6.3) sheet metal or wood screws to install Intermediate Flange. #12 (M5.5) screws may also be used |
Materials: |
Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin finish. 1-1/4" (32mm) outside diameter. Ends are heliarc welded to
concealed mounting flanges. Clearance between the grab bar and wall is 1-1/2" (38mm).
Concealed Mounting Flanges — 18-8 S, type-304, 1/8" (3mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with two holes for
attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.
Snap Flange Covers — 18-8 S, type-304, 22-gauge (0.8mm) drawn stainless steel with satin finish. 3-1/4" (85mm) diameter x 5/8" (16mm) deep. Each
cover snaps over mounting flange to conceal mounting screws |
|
|
Customer Reviews
There are no customer reviews yet.
|
|
|